64
≫
≫
≫
≫
≫
≫
5.1.4 Channel ZONE SPEAKER (For North American models only)
ZONE 2
bm
bl
2
1
7
8
9
bk
5
4
6
3
MAIN ROOM
MAIN ROOM:
This is an example of combining the top middle speakers at the front and the rear high speakers at the rear
to the 5.1 Channel System. The height speakers in front can be selected from following 4 types. The height speakers that
can be combined at the rear differ depending on the height speakers used at the front.
❏
Combination example when Top Front Speakers are used at the front (
)
❏
Combination example when Top Middle Speakers are used at the front (
)
❏
Combination example when Front High Speakers are used at the front (
)
❏
Combination example when Dolby Enabled Speakers (Front) are used at the front (
)
ZONE 2:
You can enjoy 2-ch audio in the separate room (ZONE 2) while performing playback in the main room (where
this unit is located). The same source can be played back in the main room and ZONE 2 simultaneously. Also, different
sources can be played back in both rooms.
•
While ZONE 2 playback is being performed, Height 1 speakers installed in the main room cannot play audio.
"Speaker Setup" settings during
Initial Setup (
p183
)
Speaker Setup
5.1.4 ch
Height 1 Speaker
Height 2 Speaker
Speaker Impedance
6 ohms or above
Zone 2 Preout
Zone 2
Top Middle
Rear High
Zone 2
• Speaker Channels:
5.1.4 ch
•
Subwoofer:
Yes
•
Height 1 Speaker:
Select the type
of height speaker actually installed.
•
Height 2 Speaker:
Select the type
of height speaker actually installed.
• Zone Speaker:
Zone 2
• Zone 2 Preout:
Zone 2
•
Bi-Amp:
No
• Speaker Impedance:
Set any
value
(
p47
Setup
To output the video and audio of
the HDMI input to ZONE 2, from
the Home screen, set "System
Setup" - "Input/Output Assign" -
"TV Out/OSD" - "Zone 2 HDMI"
(
) to "Use".
