background image

47

Front Panel

   Rear Panel

   Remote

Contents 

  

Connections

 

  Playback 

  Setup 

Speaker Connections and "Speaker Setup" Settings

Connections

 

„

(Note) Speaker Impedance

Connect speakers with an impedance of 4 Ω to 16 Ω. If any of the speakers to be connected has an impedance of 4 Ω or more and less than 6 Ω, set "Speaker 

Impedance" to "4ohms" for "Speaker Setup" in the Initial Setup section ( 

p182

). When setting "Speaker Impedance" from the System Setup menu, press the   

button on the remote controller to display the Home screen, and select "System Setup" - "Speaker" - "Configuration", then set "Speaker Impedance" ( 

p151

) to 

"4ohms".

 

„

Connect the Speaker Cables

1/2˝

(12 mm)

Make correct connection between the unit's jacks and speaker's jacks (+ side to + side, and - side to - side) for each channel. If the connection is wrong, a bass sound 

will not be reproduced properly due to reverse phase. Twist the wires exposed from the tip of the speaker cable so that the wires do not stick out of the speaker terminal 

when connecting. If the exposed wires touch the rear panel, or the + side and - side wires touch each other, a malfunction may occur.

Summary of Contents for VSX-LX504












































































































































































































Reviews: