Pioneer VSX-LX504 Instruction Manual Download

Page: 153 / 203

153

≫

≫

≫

≫

≫

≫

Distance

Set the distance from each speaker to the listening position.

Setting Item

Default Value

Setting Details

Front Left

10.0 ft/3.00 m

Specify the distance between each speaker and

the listening position.

Center

10.0 ft/3.00 m

Specify the distance between each speaker and

the listening position.

Front Right

10.0 ft/3.00 m

Specify the distance between each speaker and

the listening position.

Height 1 Left

10.0 ft/3.00 m

Specify the distance between each speaker and

the listening position.

• Depending on the use of the ZONE speakers, it

may not be possible to select this setting.

Height 1 Right

10.0 ft/3.00 m

Specify the distance between each speaker and

the listening position.

• Depending on the use of the ZONE speakers, it

may not be possible to select this setting.

Height 2 Left

10.0 ft/3.00 m

Specify the distance between each speaker and

the listening position.

• Depending on the use of the ZONE speakers, it

may not be possible to select this setting.

Height 2 Right

10.0 ft/3.00 m

Specify the distance between each speaker and

the listening position.

• Depending on the use of the ZONE speakers, it

may not be possible to select this setting.

Surround Right

10.0 ft/3.00 m

Specify the distance between each speaker and

the listening position.

Surr Back Right

10.0 ft/3.00 m

Specify the distance between each speaker and

the listening position.

• Depending on the use of the ZONE speakers, it

may not be possible to select this setting.

Surr Back Left

10.0 ft/3.00 m

Specify the distance between each speaker and

the listening position.

• Depending on the use of the ZONE speakers, it

may not be possible to select this setting.

Setting Item

Default Value

Setting Details

Surround Left

10.0 ft/3.00 m

Specify the distance between each speaker and

the listening position.

Subwoofer

10.0 ft/3.00 m

Specify the distance between each speaker and

the listening position.

•

Default values vary depending on the regions.

• The unit of distance can be changed by pressing the MODE button on the remote

controller. When using the unit "feet", the setting is available in increments of 0.1 ft from

0.1 ft to 30.0 ft. When using the unit "meter", the setting is available in increments of

0.03 m from 0.03 m to 9.00 m.

Summary of Contents for VSX-LX504












































































































































































































Search results

Summary of Contents for VSX-LX504

Reviews:

Related manuals for VSX-LX504

Brands by name

Popular brands

Pioneer VSX-LX504, Instruction Manual

Search results

Summary of Contents for VSX-LX504

Reviews:

Related manuals for VSX-LX504

Brands by name

Popular brands