Pioneer VSX-LX503 Instruction Manual Download Page 79

Page: 79 / 174

≫

≫

≫

≫

≫

≫

Spotify

By connecting this unit to the same network as mobile devices, such as a smartphone and tablet, you can enjoy music played with Spotify Connect wirelessly.

• To play Spotify Connect, install a Spotify application on your smartphone or tablet. Also, you need to obtain a Spotify premium account.

– For details of Spotify settings, go to:

www.spotify.com/connect/

Playing Back

1. Connect the mobile device to the access point where this unit is connected via

network.

2. Start up the Spotify application.

3. Play a track on the Spotify application, switch the screen to the playback

operation screen, and then tap "Devices Available" on the bottom of the

screen.

4. Select this unit.

This unit is automatically turned on, the input is switched to NET, and Spotify

will start the streaming playback.

• If "System Setup" - "Hardware" - "Power Management" - "Network Standby" is

set to "Off" in the Home, manually turn the unit on and then press NET on the

remote controller. In the factory default setting, the Network Standby function

(

p131

) is set to On.

Notes when using the multi-zone function

• To enjoy Spotify music in a separate room, select NET manually as the input

of the separate room. Then, select this unit on the Spotify application.

• Volume adjustment with the Spotify application is possible for speakers

connected to the ZONE speaker terminals or when the volume of the audio

device in a separate room is configured so that its volume can be adjusted on

this unit. In any other cases, adjust the volume on the audio device placed in a

separate room.

• To enjoy Spotify music in the main room after playing it in a separate room,

switch the input of the main room to NET.

Wi-Fi

Devices Available

Pioneer VSX-LX503 XXX

Summary of Contents for VSX-LX503















































































































































































Search results

Summary of Contents for VSX-LX503

Reviews:

Related manuals for VSX-LX503

Brands by name

Popular brands

Pioneer VSX-LX503, Instruction Manual

Search results

Summary of Contents for VSX-LX503

Reviews:

Related manuals for VSX-LX503

Brands by name

Popular brands