VSX-D912-S
90
1
2
3
4
1
2
3
4
C
D
F
A
B
E
1
SIGNAL SELECT indicators
Lights to indicate the type of input signal assigned for the
current component:
AUTO
Lights when
AUTO
signal select is on.
SB
Depending on the source, this lights when a signal with
surround back channel encoding is detected.
DIGITAL
Lights when a digital audio signal is detected.
2
DIGITAL
Lights when a Dolby Digital encoded signal is detected.
ANALOG
Lights when an analog signal is detected.
DTS
Lights when a source with DTS encoded audio signals
is detected.
2
DTS
When the
STANDARD
mode of the receiver is on, this
lights to indicate decoding of a DTS signal.
3
2
DIGITAL
When the
STANDARD
mode of the receiver is on, this
lights to indicate decoding of a Dolby Digital signal.
4
2
PRO LOGIC II
When the (
STANDARD
) Pro Logic II mode of the receiver is
on, this lights to indicate Pro Logic II decoding.
5
VIR.SB
Lights during Virtual surround back processing.
6
ATT
Lights when
INPUT ATT
is used to attenuate (reduce) the
level of the analog input signal.
7
DIRECT
Lights when source direct playback is in use. Direct
playback bypasses the tone controls and channel levels for
the most accurate reproduction of a source.
8
MIDNIGHT
Lights during Midnight listening.
9
SLEEP
Lights when the receiver is in sleep mode.
10 RF ATT
Lights when the RF attenuator is on.
11 Speaker indicator
Shows the speaker system currently in use.
12 EON
When the EON mode is set. the
EON
indicatorlights, but
during actual reception of an EON broadcast the
EON
indicator will flash.
13 indicator
The indicator lights to inform you that the currently tuned
station carries the EON data service.
14 RDS
Lights when an RDS broadcast is received.
15 Character display
16 Neo:6
When the (
STANDARD
) NEO:6 mode of the receiver is on,
this lights to indicate NEO:6 processing.
17 ADV.SURR. (Advanced Surround)
Lights when one of the Advanced Surround modes has
been selected.
18 LOUDNESS
Lights when
LOUDNESS
has been selected.
19 TUNER indicators
STEREO
Lights when a stereo FM broadcast is being received in
auto stereo mode.
MONO
Lights when the mono mode is set using the
MPX
button.
TUNED
Lights when a broadcast is being received.
20 Master volume level
Shows the overall volume level.
---dB
indicates the minimum level, and
- 0 dB
indicates the maximum level.
Depending on your level settings for each channel, the
maximum volume can range between –10 dB and –0 dB.
RFATT EON
SP
A B
RDS
1
2
3
4
5
7
6
14
8
9
10
12 13
11
15
20
18
17
16
19
Display