Pioneer VSX-D512, Operating Instructions Manual

Page: 38 / 96

Using the tuner 07
38
En
Naming station presets
For easier identification, you can name your
station presets.
1 Choose the station preset you want to
name.
See Listening to station presets (this page) for
how to do this.
2 If you’re using the remote control,
press RECEIVER.
3 Press TUNER EDIT.
The display shows ST. NAME , then a blinking
cursor at the first character position.
4 Input the name you want.
Names can be up to four characters long.
• Use the
MULTI JOG/INPUT SELECTOR
dial
(front panel) or the
}
and
]
buttons
(remote) to select characters.
• Press ENTER to confirm a character. If no
character is input, a space is input.
• The name is stored when
ENTER
is
pressed after choosing the fourth character.
To erase a station name, simply repeat steps
1-3 and input four spaces instead of a name.
Once you have named a station preset, you
can press
DISPLAY
when listening to a
station to switch the display between the
name and the frequency.
Listening to station presets
Having stored up to 30 stations (see previous
page), preset stations can be easily recalled.
1 Press TUNER (remote) or use the MULTI
JOG/INPUT SELECTOR dial on the front
panel to select the tuner.
2 Press CLASS to select the class in which
the station is stored.
Press repeatedly to cycle through classes A, B
and C.
3 Press S/– to select the station
preset you want.
• If the receiver is left disconnected from the
AC power outlet for an extended period, the
station memories will be lost and will have to
be reprogrammed.
XRE3068A.En.36.43 03.2.3, 11:13 AM 38