Pioneer VSX-D510, Service Manual

Page: 56 / 60

56
VSX-D510
8.1 PANEL FACILITIES
8. PANEL FACILITIES AND SPECIFICATIONS
Front Panel
1
STATION (+/–) buttons
Selects station memories when using the tuner.
2
TUNING buttons
Selects the frequency when using the tuner.
3
DIRECT button
Use to switch DIRECT playback on or off. This mode
bypasses the tone controls and channel levels for the
most accurate reproduction of a source.
4
MONITOR button
Press to switch tape monitoring on/off.
5
Remote sensor
Receives the signals from the remote control.
6
TONE button
Press this button to access the bass and treble controls,
which you can then adjust with the
MULTI JOG dial
.
7
MULTI JOG DIAL
The Multi Jog dial performs a number of tasks. Use it to
select the function (like DVD or CD) that you want to play.
You can also use it, after pressing the
TONE
button to
increase or decrease the amount of bass or treble.
8
STANDBY indicator
Lights when the receiver is in standby mode (note that
the receiver consumes a small amount of power (1W) in
standby mode).
9
STANDBY/ON button
Switches the receiver between on and standby.(note that
the receiver consumes a small amount of power (1W) in
standby mode).
0
PHONES jack
Use to connect headphones. (Use the
SPEAKER
button
to turn off the speakers if you want to mute the sound
from the speakers.)
-
CLASS button
Switches between the three banks (classes) of station
memories.
=
MEMORY button
Press to memorize a station for recall using the
STATION
(+/–)
buttons.
~
BAND button
Switches between station AM and FM radio bands.
!
MPX button
lf the
TUNED
or
STEREO
indicators don't light when tuning
to an FM station because the signal is weak, press the
MPX
button to switch the receiver into mono reception
mode. This should improve the sound quality and allow
you to enjoy the broadcast.
@
SPEAKER button
Use to switch the speaker system between
A
(on) and
off
.
#
MIDNIGHT button
Use when listening to movie soundtracks at low volume.
This feature will enable you to hear quiet sounds and not
get jolted by loud or sudden sound effects.
$
DVD 5.1ch button
Use this button to switch between a DVD player hooked
up to the digital inputs and a 5.1 ch external decoder
hooked up to the 5.1 ch analog inputs.
%
DSP MODE button
Use to switch between the various DSP modes available
(
HALL1, HALL 2, JAZZ, DANCE, THEATER1, THEATER 2
)
and
DSP off
. Use to create different surround sound
effects from any stereo source.
^
SIGNAL SELECT button
Use to select between an analog or digital signal.
&
/DTS button
Use to switch between the various Dolby/DTS surround
modes.
*
MASTER VOLUME
Use to set the overall listening volume.
1
R
TONE
DOWN UP
MULTI JOG
PHONES
STANDBY
STANDBY/ON
STATION
CLASS MEMORY BAND MPX SPEAKERS MIDNIGHT
TUNING
DIRECT
DVD
5.1CH
DSP
MODE
/DTS
SIGNAL
SELECT
MONITOR
MASTER
VOLUME
1
N∫m
-
Û.,?
Digital Signal Processor
! @ & ^ ~ % # * $
1
2 3 4 5
6 7
8 9 0
- =