51
VSX-C300
7. GENERAL INFORMATION
7.1 DIAGNOSIS
7.1.1 Test Mode
• How to Enter the Test Mode
With the attatched Remote Control Unit
1. For Preset mode, set the remote control
(1) Enter [ REMOTE SETUP ] + [ 1 ] keys.
(Simul taneous aggressiveness)
(2) Enter [ 1 ], [ 5 ], [ 0 ] keys.
(Call a PRESET ID code 150 )
(3) Enter [ Front ] key. (Assign a function key)
(4) Enter [ REMOTE SETUP ] key. (Confirm PRESET mode)
2. Test mode ON
" +10 " key
• "TEST" is displayed for 5 seconds when Test mode is entered.
• Function: TV/SAT
• Speaker setting: All high volume, SW ON
No automatic speaker detection
• STANDARD mode
• Presetting of the tuner for Test mode will be carried out.
Other settings will be returned to the factory-preset values.
3. FL & LED light-emission check " 1 " key
Each time the remote-control code is received, the displays of the
FL and LED change cyclically as follows:
Normal display
→
All lights for the FL and LED on
→
All lights
for the FL and LED off
→
FL: "ABCDEFGH" displayed; and LED:
Every other letter of the alphabets is displayed
→
FL: "IJKLMNOP"
displayed; and LED: Every other letter of the alphabets is displayed
highlighted
→
Normal display
→ ...
4. Rear-and-center-relay switch
" 2 " key
Each time the remote-control code is received, the rear-and-center
relay is toggled on or off.
5. DOLBY Pro Logic mode
" 3 " key
• Distance setting for the front and center speakers: 10 feet
• Distance setting for the rear speaker: 5 feet
• STANDARD mode
• Speaker setting: All high volume, SW ON
All settings other than the above will be returned to the factory-
preset values.
6. FAN ON/OFF switch
" 4 " key
The fan is turned on or off and rotates as follows:
Low speed
→
High speed
→
Off ...
7. Master volume switch
" 5 " key
The master volume is switched between minus infinity and 0 dB,
and each trim is 0 dB.
When the remote-control code is received for the first time, the master
volume is set to minus infinity.
8. 9k/10k switch
" 6 " key
For the models HL, SB and SP only, when the $A55F+$A505 code
is received, this switches between 9k and 10k.
9. Thermistor A/D value, time display
" 7 " key
When the remote-control code is received, the A/D value (0-255) of
the thermistor is displayed on the FL display. Time is displayed
until 60:00, and then stops.
While the A/D value and time are displayed, if the remote-control
code is received again, the display will return to the normal display.
Time counting will not stop.
10. Speaker auto-detection check " 8 " key
When the remote-control code is received, automatic detection of
the speaker starts, and the result will be displayed for 5 seconds, as
"C:_SW:_", where
Ο
¸ indicates connected, and
×
indicates that no
speaker is connected.
11. Analog inputs check
" 9 " key
When the remote-control code is received, forced analog inputs and
2-channel stereo mode are set for all functions.
• Speaker setting: All high volume, SW ON
• When this mode is entered, "SJG:ANA" will be displayed for 5
seconds.
12. STBY mode
" 0 " key
STBY mode is entered when the remote-control code is received.