Advanced setup
11
77
En
Use the front panel
MULTI JOG
dial (or
/
on the
remote) to change the character and
ENTER
to move
forward a position. If you want to change a character you
input, you can press
RETURN
to go back one position.
The name can be up to ten characters (the possible
characters are listed below).
ABCDEFGHIJKLMNOPQRSTUVWXYZ
abcdefghijklmnopqrstuvwxyz
0123456789
!”#$%&’()*+,–./:;<=>?@[ \ ]^_{|} (space)
4
Select another name to edit, or select ‘Exit’ from
the bottom of the list if you’re done.
If you’ve selected another name, repeat step 3, otherwise
you’ll return to the System Setup menu.
PHONO/LINE Setup
• Default setting:
PHONO
You can choose whether you want to use the
PHONO
jack on the rear of the receiver to connect a turntable, or
a line level component (such as a CD or DVD player).
1
Select ‘PHONO/LINE Setup’ from the System
Setup menu.
The current setting is highlighted in the display.
2
Select either PHONO or LINE.
•
PHONO
– High level setting for turntables (without a
built-in equalizer or pre-amplifier)
•
LINE
– Line level setting for all audio components
other than a turntable (except those with a built-in
phono equalizer
3
When you’re finished, select ‘Exit’.
You will return to the System Setup menu.
System Setup
[ 1. Surround Setup
]
[ 2. THX CINEMA Setup ]
[ 3. Input Assign
]
[ 4. Function Rename
]
[
5. PHONO/LINE Setup
]
[ 6. Multi Room
]
[ 7. 12V Trigger
]
[ Exit
]
5. PHONO / LINE Setup
[
PHONO
]
[ LINE
]
[ Exit
]
VSX-9300.book 77 ページ ２００４年５月２１日 金曜日 午前１１時２８分
