Other Settings
09
61
En
The Other Setup menu
The Other Setup menu is where you can make
customized settings to reflect how you are using the
receiver.
1
Press RECEIVER on the remote control, then press
the SETUP button.
An on-screen display (OSD) appears on your TV. Use the
///
buttons and
ENTER
to navigate through the
screens and select menu items. Press
RETURN
to
confirm and exit the current menu.
2
Select ‘Other Setup’ then press ENTER.
3
Select the setting you want to adjust.
If you are doing this for the first time, you may want to
adjust these settings in order:
•
Multi Zone Setup
– Specify your volume setting for
a MULTI-ZONE setup (see
Multi Zone Setup
below).
•
SR+ Setup
– Specify how you want to control your
Pioneer plasma display (see
SR+ Setup for Pioneer
plasma displays
below).
•
OSD Adjustment
– Adjust the position of the on-
screen display on your TV (see
OSD Adjustment
below).
4
Make the adjustments necessary for each setting,
pressing RETURN to confirm after each screen.
Multi Zone Setup
• Default setting:
Variable
If you’ve made MULTI-ZONE connections (see
MULTI-
ZONE listening
on page 55) you may need to specify your
volume setting.
1
Select ‘Multi Zone Setup’ from the Other Setup
menu.
2
Select the volume level setting.
1
•
Variable
– Use this setting if you’ve connected a
power amplifier in the sub zone (this receiver is
simply being used as a pre-amp) and you will be
using this receiver’s controls to adjust the volume.
•
Fixed
– Use this setting if you’ve connected a fully
integrated amplifier (such as another Pioneer VSX
receiver) in the sub zone and want to use that
receiver’s volume controls (this setting is not
available if the surround back system setting is set to
ZONE2
).
With the
Fixed
setting, the source is sent from this
receiver at maximum volume, so make sure the volume is
quite low in the sub zone at first and then experiment to
find the correct level.
3
When you're finished, press RETURN.
You will return to the Other Setup menu.
SR+ Setup for Pioneer plasma displays
Make the following settings if you have connected a
Pioneer plasma display to this receiver using an SR+
cable. Note that the number of function settings available
will depend on the plasma display you’ve connected.
See also
Using this receiver with a Pioneer plasma display
on page 57 and
Using the SR+ mode with a Pioneer
plasma display
on page 58.
1
Select ‘SR+ Setup’ from the Other Setup menu.
2
Select the ‘PDP Volume Control’ setting you want.
•
OFF
– The receiver does not control the volume of the
plasma display.
VIDEO/GAME
(Fixed)
(Fixed)
HDMI 1
HDMI 2
XM
SIRIUS
CD
OPT 3
CD-R/TAPE/MD
TUNER
MULTI CH IN
iPod
Input source
Input Terminals
Digital
Component
System Setup
1.Auto MCACC
2.Surr Back System
3.Manual MCACC
4.Data Management
5.Manual SP Setup
6.Input Setup
7.Other Setup
: Exit
7.Other Setup
:Return
a.Multi Zone Setup
b.SR+ Setup
b.OSD Adjustment
Note
1 If you selected
ZONE2
in the
Surround back speaker setting
on page 36, you won’t be able to change the volume level.
7.Other Setup
:Return
a.Multi Zone Setup
b.SR+ Setup
b.OSD Adjustment
7a.Multi Zone Setup
:Finish
Volume Level
Variable
Be careful of loud
volume when "FIXED"
is selected.
7.Other Setup
:Return
a.Multi Zone Setup
b.SR+ Setup
c.OSD Adjustment
7b.SR+ Setup
:Finish
PDP Volume Control
OFF
Monitor Out Connect
[ OFF ]
VSX-91TXH_KU.book Page 61 Friday, March 16, 2007 5:31 PM
