Pioneer VSX-917-K Operating Instructions Manual Download Page 30

Page: 30 / 74

Listening to your system

Listening in stereo

When you select

STEREO

you will hear the

source through just the front left and right
speakers (and possibly your subwoofer
depending on your speaker settings).

Dolby Digital and DTS multichannel sources
are downmixed to stereo.

•

While listening to a source, press

STEREO/F.S.SURR for stereo playback.

Press repeatedly to switch between:

•

STEREO

– The audio is heard with your

surround settings and you can still use the
Midnight, Loudness, and Tone functions.

•

F.S.S.FOCUS

– See

Using Front Stage

Surround Advance

below for more on this.

•

F.S.S. WIDE

– See

Using Front Stage

Surround Advance

below for more on this.

Using Front Stage Surround
Advance

The Front Stage Surround Advance function
allows you to create natural surround sound
effects using just the front speakers and the
subwoofer.

•

While listening to a source, press STEREO/

F.S.SURR to select Front Stage Surround
Advance modes.

•

STEREO

– See

Listening in stereo

above for

Summary of Contents for VSX-917-K











































































Search results

Summary of Contents for VSX-917-K

Reviews:

Related manuals for VSX-917-K

Brands by name

Popular brands

Pioneer VSX-917-K, Operating Instructions Manual

Search results

Summary of Contents for VSX-917-K

Reviews:

Related manuals for VSX-917-K

Brands by name

Popular brands