Pioneer VSX-830-K, Operating Instructions Manual, Page: 43 / 141

43
Connecting your equipment (In case of VSX-830)
04
! If you want to listen to the sound of the TV over the receiver, connect the receiver and TV with audio cables.
—
When the TV and receiver are connected by HDMI connections, if the TV supports the HDMI ARC (Audio
Return Channel) function, the sound of the TV can be input to the receiver via the HDMI OUT terminal, so
there is no need to connect an audio cable. In this case, set
ARC
at
HDMI Setup
to
ON
(see HDMI Setup on
page 82 ).
After setting the ARC , some time may be required for the connected device to be recognized and the sound to
be produced.
—
If you use a coaxial digital audio cable, you’ll need to tell the receiver which digital or analog audio input you
connected the TV to (see The Input Setup menu on page 59 ).
—
Please refer to the TV’s operation manual for directions on connections and setup for the TV.
! If the TV to be connected using HDMI supports 4K/60p, you can switch the 4K/60p signal input setting in
accordance with TV performance. When the 4K/60p setting is changed to 4:4:4 , the video image may not be
output normally unless the HDMI cable supports 4K/60p 4:4:4 24 bit (18 Gbps transmission). In such a case,
select
4:2:0 ( page 88 ).
! You cannot input 4K/60p 4:4:4 24 bit video from
HDMI IN 3
to the
IN 5
terminal. Use the
BD IN
,
HDMI IN 1
or
HDMI IN 2 terminal.
About video outputs connection
This receiver is not loaded with a video converter. When you use HDMI cables for connecting to the input device,
the same cables should be used for connecting to the TV.
The signals input from the analog (composite) video inputs of this unit will not be output from the
HDMI OUT
terminal.
VIDEO
VIDEO
IN
IN
HDMI
MONITOR
OUT
HDMI
OUT
Playback component
Terminal for connection
with source device
Terminal for connection
with TV monitor
The OSD will not
appear.
TV
Video signals can be output.
Connection when there is no HDMI terminal on the TV or player equipment
When there is no HDMI terminal on either the TV or player equipment, connect the equipment each with an ana-
logue video cable.
Important
Also, when the receiver and TV are connected by anything other than an HDMI cable, the OSD function allow-
ing display of the receiver’s settings, operations, etc., on the TV’s screen cannot be used. In this case, watch the
receiver’s front panel display while performing the various operations and making settings.
(TV)
(CD)
1
1
DIGITAL IN
/MHL BD 5
1 5 -
4 3 2 1 (OUTPUT 5 V
0.9 A MAX)
ASSIGNABLE
ASSIGNABLE
ASSIGNABLE
OPTICAL
COAXIAL
DVD
L R
SAT/CBL
ARC CONTROL
(DVD) (SAT/CBL)
HDMI IN OUT
AUDIO IN VIDEO IN
MONITOR OUT
(TV)
(CD)
1
1
DIGITAL IN
ASSIGNABLE
ASSIGNABLE
OPTICAL
COAXIAL
DVD
L R
ARC CONTROL
OUT
AUDIO IN VIDEO IN
MONITOR OUT
SAT/CBL
/MHL BD 5
1 5 -
4 3 2 1
(OUTPUT 5 V
0.9 A MAX)
(DVD) (SAT/CBL)
HDMI IN
ASSIGNABLE
VIDEO
VIDEO OUT
VIDEO
VIDEO IN DIGITAL OUT
COAXIAL OPTICAL
ANALOG
R L
AUDIO OUT HDMI OUT
TV
DVD player, etc.
Select one