Pioneer VSX-532 Operating Instructions Manual Download

Page: 22 / 39

Basic playback

In the following locations, poor condition or inability to receive
radio waves may cause the audio to be interrupted or
stopped:

•

In reinforced concrete buildings or steel framed or iron-
framed buildings.

•

Near large metallic furniture.

•

In a crowd of people or near a building or obstacle.

•

In a location exposed to the magnetic field, static electricity
or radio wave interference from radio communication
equipment using the same frequency band (2.4 GHz) as
this unit, such as a 2.4 GHz wireless LAN device
(IEEE802.11b/g) or microwave oven.

•

If you live in a heavily populated residential area
(apartment, townhouse, etc.) and if your neighbor’s
microwave is placed near your system, you may
experience radio wave interference. If this occurs, move
your unit to a different place. When the microwave is not
in use, there will be no radio wave interference.

Radio wave reflections

The radio waves received by this unit include the radio wave
coming directly from the device equipped with BLUETOOTH
wireless technology (direct wave) and waves coming from
various directions due to reflections by walls, furniture and
building (reflected waves). The reflected waves (due to
obstacles and reflecting objects) further produce a variety of
reflected waves as well as variation in reception condition
depending on locations. If the audio cannot be received
properly due to this phenomenon, try moving the location of
the device equipped with BLUETOOTH wireless technology
a little. Also note that audio may be interrupted due to the
reflected waves when a person crosses or approaches the
space between this unit and the device equipped with
BLUETOOTH wireless technology.

Precautions regarding connections to products

supported by this unit

•

Complete connections for all devices supported by this
unit, including all audio cords and power cables before
connecting them to this unit.

•

After completing connections to this unit, check the audio
and power cables to confirm that they not twisted together.

•

When disconnecting this unit, confirm that you have
sufficient working space in the surrounding area.

When changing connections of audio or other cables for
products supported by this unit, confirm that you have
sufficient working space in the surrounding area.

Listening to the radio

The following steps show you how to tune in to FM and AM
radio broadcasts using the automatic (search) and manual
(step) tuning functions. Once you are tuned to a station you
can memorize the frequency for recall later—see

Saving

station presets

below

for more on how to do this.

Press

TUN

to select the tuner.

Use

BAND

to change the band (FM or AM), if

necessary.

Each press switches the band between FM (stereo or
mono) and AM.

Tune to a station.

There are three ways to do this:



Automatic tuning

To search for stations in the currently selected band,
press and hold

TUNE +/–

for about a second. The

receiver will start searching for the next station, stopping
when it has found one. Repeat to search for other
stations.



Manual tuning

To change the frequency one step at a time, press

TUNE +/–



High speed tuning

Press and hold

TUNE +/–

for high speed tuning.

Improving FM sound

If the

TUNE

indicators don’t light when tuning to an FM

station because the signal is weak, set the receiver to the
mono reception mode.

…

Press

BAND

to select FM MONO.

This should improve the sound quality and allow you to
enjoy the broadcast.

Saving station presets

If you often listen to a particular radio station, it’s convenient
to have the receiver store the frequency for easy recall
whenever you want to listen to that station. This saves the
effort of manually tuning in each time. This unit can
memorize up to 30 stations.

Tune to a station you want to memorize.

See

Listening to the radio

above

for more on this.

Press

EDIT

The display shows

PRESET

, then a blinking

MEM

and