1
1
6
Chapter
Controls and displays
Front panel
1
INPUT SELECTOR
dial
Selects an input source (
).
2
Receiver control buttons
SPEAKERS
– Use to change the speaker system on or off.
When the
SP OFF
is selected, no sound is output from the
speakers connected to this receiver.
DIMMER
– Dims or brightens the display. The brightness
can be controlled in four steps.
DISPLAY
– Switches the display of this unit. The listening
mode, sound volume, input name can be checked by
selecting an input source.
3
Character display
See
.
4
Tuner control buttons
BAND
– Switches between AM, FM ST (stereo) and FM
MONO radio bands (
).
TUNER EDIT
– Use with
TUNE
/
,
PRESET
/
and
ENTER
to memorize and name stations for recall
TUNE
/
– Used to find radio frequencies (
).
PRESET
/
– Use to select preset radio stations
5
HDMI indicator
Blinks when connecting an HDMI-equipped component;
lights when the component is connected (
6
Remote sensor
Receives the signals from the remote control (see
7
MASTER VOLUME
dial
8
STANDBY/ON
9
PHONES jack
Use to connect headphones. When the headphones are
connected, there is no sound output from the speakers. The
listening mode when the sound is heard from the headphone
can be selected only from
PHONES SURR
,
STEREO
or
STEREO ALC
mode.
10
Listening mode buttons
AUTO SURROUND/STREAM DIRECT
– Switches between
Auto surround mode (
) and Stream Direct
playback (
).
ALC/STANDARD SURR
– Press for standard decoding
and to switch between the modes of
Pro Logic and
NEO:6, and the Auto level control stereo mode (
ADVANCED SURROUND
– Switches between the various
surround modes (
).
11
ECO
Switches between ECO Mode 1/ECO Mode 2. When ECO
Mode is turned
ON
, the display will go dark (
12
SOUND RETRIEVER
Turn sound retriever effect on/off.
13
USB terminal
Use to connect your USB mass storage device as an audio
source (
3
4
1
5
7
2
6
8
9
11
10
12
13
