4
Connecting your equipment
2
2
15
31
6
Connecting your component with no HDMI terminal
This diagram shows connections of a TV and DVD player (or other
playback component) with no HDMI terminal to the receiver.
Important
•
When the receiver and TV are connected by composite cable,
the OSD function allowing display of the receiver’s settings,
operations, etc., on the TV’s screen cannot be used. In this
case, watch the receiver’s front panel display while
performing the various operations and making settings.
Note
•
You can only connect one component to the optical input
terminal. If connecting other devices, please use a different
method to connect the audio.
In order to listen to the audio from the source component
that is connected to this receiver using an optical cable, first,
switch to the
DVD
(DVD player) or
SAT/CBL
(set-top box),
then press
SIG SEL
to choose the audio signal
O1
(OPTICAL1) (see
Selecting the audio input signal
on page 18
).
•
You can only connect one component to the coaxial input
terminal. If connecting other devices, please use a different
method to connect the audio.
In order to listen to the audio from the source component
that is connected to this receiver using a coaxial cable, first,
switch to the
DVD
(DVD player) or
SAT/CBL
(set-top box),
then press
SIG SEL
to choose the audio signal
C1
(COAXIAL1) (see
Selecting the audio input signal
on page 18
).
VIDEO OUT
DIGITAL AUDIO OUT
OPTICAL
COAXIAL
R
L
ANALOG AUDIO OUT
DIGITAL AUDIO OUT
OPTICAL
COAXIAL
R
L
ANALOG AUDIO OUT
VIDEO OUT
VIDEO IN
DIGITAL AUDIO OUT
OPTICAL
R
L
ANALOG AUDIO OUT
Select one
TV
DVD player
Select one
This connection is
required in order
to listen to the
sound of the TV
over the receiver.
Select one
Set-top box
OSD cannot be output.
