Pioneer VSX-322-K Operating Instructions Manual Download Page 16

Page: 16 / 31

Connecting your equipment

Using external antennas

To improve FM reception

Use a PAL connector (not supplied) to connect an external

FM antenna.

To improve AM reception

Connect a 5 m to 6 m length of vinyl-coated wire to the AM

antenna terminal without disconnecting the supplied AM

loop antenna.
For the best possible reception, suspend horizontally

outdoors.

Plugging in the receiver

Only plug in after you have connected all your components to

this receiver, including the speakers.

CAUTION

• Handle the power cord by the plug part. Do not pull out

the plug by tugging the cord, and never touch the power

cord when your hands are wet, as this could cause a short

circuit or electric shock. Do not place the unit, a piece of

furniture, or other object on the power cord or pinch the

cord in any other way. Never make a knot in the cord or tie

it with other cables. The power cords should be routed so

that they are not likely to be stepped on. A damaged

power cord can cause a fire or give you an electric shock.

Check the power cord once in a while. If you find it

damaged, ask your nearest Pioneer authorized

independent service company for a replacement.

• Do not use any power cord other than the one supplied

with this unit.

• Do not use the supplied power cord for any purpose other

than that described below.

• The receiver should be disconnected by removing the

mains plug from the wall socket when not in regular use,

e.g., when on vacation.

Note

• After this receiver is connected to an AC outlet, a 2

second to 10 second HDMI initialization process begins.

You cannot carry out any operations during this process.

The

HDMI

indicator in the front panel display blinks

during this process, and you can turn on this receiver

once it has stopped blinking. When you set

ARC

at HDMI

setup to

OFF

, you can skip this process. For details, see

ARC (Audio Return Channel) function

on page 27.

Plug the supplied power cord into the AC IN socket on

the back of the receiver.

Plug the other end into a power outlet.

ANTENNA

FM UNBAL

One-touch

PAL connector

coaxial cable

ANTENNA

AM LOOP

Outdoor

antenna

5 m to 6 m

Indoor antenna

(vinyl-coated wire)

Summary of Contents for VSX-322-K
































Search results

Summary of Contents for VSX-322-K

Reviews:

Related manuals for VSX-322-K

Brands by name

Popular brands

Pioneer VSX-322-K, Operating Instructions Manual

Search results

Summary of Contents for VSX-322-K

Reviews:

Related manuals for VSX-322-K

Brands by name

Popular brands