Pioneer VSX-1022-K, Service Manual

Page: 67 / 161

67
VSX-1022-K
5 6 7 8
5 6 7 8
A
B
C
D
E
F
[Procedures]
6. W hen update is completed, "Completed" is displayed by
T V screen and HDMI LED lights.
* "UPDATE" blinks to FL display and is displayed.
In rare cases, "Completed!" may not be displayed on the
T V screen. In such a case, updating is completed if the
HDMI LED has become lit. Proceed to Step 7.
7. Disconect the AC power cord. (The PO W ER button does
not respond.) Confirm a version of the firm ware of
SUB microcomputer.
Note:
Because update is not possible again, never unplug the
power cord until the updating process is completed.
1. Turn on the unit.
2. Set a function for a "
N ETRADIO".
Note:
W ithout a network connection, "Server Error" will be
displayed on the T V screen. Under this condition, the
Service Menu (menu for updating the SUB microcomputer)
is not accessible. Set the remote control unit supplied with
the unit to
N etwork Function Operation mode then press
the E N TER button so that "Empty" is displayed on the screen.
Then proceed to Step 3.
3. Press the "ESC (A 8 5F)" button on the Service remote
control unit (GGF13 8 1), then press the "+10 (A 8 1F)"
button to enter the service menu (for SUB microcomputer
firmware update menu).
W hen you press other buttons between "ESC" button and
"+10" buttons, be invalid.
4. Press the "E N TER" button of the remote control unit
supplied with N etwork Function as the state that you can
operate.
(1)
W hen a product can recognize a file, become the
following indication.
Select "Start", and press the "E N TER" button.
5. Update starts, and "UPDATE" blinks to FL screen and
HDMI LED blinks.
Be approximately 8 minutes for update at time.
(2) SUB microcomputer firmware update
• N etworkStandby: OFF
• HDMI Control: OFF
• HDMI StandbyThrough: OFF (
N orth America model only)
• Connect a unit to T V and HDMI, and the GUI output of the unit performs in a state to appear.
[Preparations]
Save the firmware file to the "root" of empty USB memory.
The file name of the firmware file is "RegM13Sub_
V ***.bcd". Don't save other files.
(2) W hen a product cannot recognize a file, become the
following indication. Check on USB memory with a file.