Pioneer UDP-LX800, Operating Instructions Manual, Page: 29 / 64

29
En
04
Switching the subtitles
For discs or files on which multiple subtitles are
recorded, the subtitles can be switched during
playback.
Caution
• The subtitles cannot be switched for discs
recorded by a DVD or BD recorder. Also refer
to the operating instructions for the device
used for recording.

During playback, press SUBTITLE.
• The current subtitle and total number of
recorded subtitles are displayed on the TV
screen.
To switch the subtitle, press
SUBTITLE
again.
• The subtitles can also be switched by selecting
Subtitle
from the
FUNCTION
menu.
• If the subtitles are not switched when
SUBTITLE
is pressed, switch them from the disc
menu screen.
❖
Turning the subtitles off

Press SUBTITLE several times or select Subtitle
from the FUNCTION menu to switch the setting to
Off.
Using the DIRECT/
TRANSPORT function
When the DIRECT function is turned on, the digital
audio output and video output are blocked and
analog audio is played back with high quality. This
function is turned Off upon shipping.
Also, turning the TRANSPORT function to on will
block the analog audio output and the circuit, and
play back digital video and digital audio with high
quality.

Press DIRECT.
• The current status is displayed on the player’s
front panel display. To switch the function,
press
DIRECT
again.
[OFF]

[DIRECT]

[TRANSPORT]

(back to
beginning)
• Turning on the DIRECT function and the
TRANSPORT function will light up the DIRECT
indicator and TRANSPORT indicator of the
main unit respectively.
Note
• When you turn on the DIRECT/TRANSPORT
function and play, the output volume may be
low depending on the settings of this device
and contents being played.
• Depending on disk or file, DIRECT/
TRANSPORT function will not work in some
cases if playback is not stopped (resume
playback function is in cancelled state). To
cancel the resume playback function, press
g
while playback is stopped.
Moving subtitles
The position of the subtitles displayed while
playing BD-ROMs or DVDs can be moved.
1 Play the BD-ROM or DVD video and display the
subtitles on the TV screen.
2 Press and hold the SUBTITLE button for at least
2 seconds.
• The Subtitle shift mode is set.
• [Subtitle shift mode] is displayed on the TV
screen.
3 Use the / buttons to move the position of the
subtitles.
• Use the / buttons to move the position of
the subtitles.
• Once the setting is complete, press
ENTER
.
4 Cancel the Subtitle shift mode.
Press the
ENTER
button.
Switching the audio
For discs or files on which multiple audio streams/
channels are recorded, audio streams/channels
can be switched during playback.

During playback, press AUDIO.
• The current audio and total number of
recorded audio streams are displayed on the
TV screen.
To switch the audio, press
AUDIO
again.
• The audio can also be switched by selecting
Audio
from the
FUNCTION
menu.
• If the audio is not switched when
AUDIO
is
pressed, switch it from the disc menu screen.
Switching the CD/SACD
playback area
1 In the stop mode, press CD/SACD.
• The current playback area setting is displayed
on the player’s front panel display. To switch
the playback area, press
CD/SACD
again.
[CD AREA]

[SACD 2CH]

[SACD MCH]

(back to beginning)
• During playback, press g twice to cancel
continuous play before selecting the playback
area.