28
> Install
> Playback
Advanced Setup | Firmware Update | Others
E
N
AV Adjust
By pressing the
button on the remote controller during
play, you can adjust frequently used settings, such as the
sound quality, using on-screen menus. Note that there is no
display on the TV screen when the input selector is "CD",
"TV", "PHONO", or "TUNER", so follow the display while
doing the operations.
1. Press
on the remote controller.
2. After the AV Adjust is displayed, select the content with
y
/
z
on the remote controller and press ENTER to
confirm your selection.
0
Change the initial values for each of the settings with the
cursors
w
/
x
.
0
To return to the previous screen, press
.
3. To exit the settings, press
.
∫
Tone
Bass
:
Enhance or moderate the bass range of the speaker.
Treble:
Enhance or moderate the treble range of the
speaker.
0
It cannot be set if the listening mode is Direct or Pure
Direct.
∫
Level
Subwoofer:
Adjust the speaker level of the subwoofer
while listening to some sound.
0
The adjustment you made will be reset to the previous
status when you turn the unit to standby mode.
∫
MCACC
MCACC EQ:
Enable or disable the equalizer function that
corrects for distortion caused by the acoustic environment
of the room.
0
This setting cannot be selected if Full Auto MCACC
setting has not been performed.
0
It cannot be set if the listening mode is Pure Direct.
Manual EQ Select:
Select "Preset 1" to "Preset 3"
configured in "MCACC" - "Manual MCACC" - "EQ Adjust"
(
P39) in the Home. The same sound field setting is
applied all ranges when set to "Off".
0
It cannot be set if the listening mode is Pure Direct.
Phase Control:
Correct phase disturbance in the low range
to enhance the bass. This enables you to achieve powerful
bass reproduction that is faithful to the original sound.
0
It cannot be set if the listening mode is Pure Direct.
Theater Filter:
Adjust the soundtrack that was processed to
enhance its high pitch range, in order to make it suitable for
home theater.
0
It cannot be set if the listening mode is Direct or Pure
Direct.
∫
Other
Sound Delay
:
If the video is behind the audio, you can
delay the audio to offset the gap. Different settings can be
set for each input selector.
Sound Retriever
:
Improve the quality of the compressed
audio. Playback sound of lossy compressed files such as
MP3 will be improved. The setting can be separately set to
each input selector. The setting is effective in the signals of
48 kHz or less. The setting is not effective in the bitstream
signals.
0
It cannot be set if the listening mode is Direct or Pure
Direct.
DRC:
Make small sounds easily heard. It is useful when you
1
BD/DVD
AV Adjust
Tone
Level
MCACC
Other
Bass
Treble
