Connecting up
03
13
En
English
Français
Español
Connecting other video
components
This receiver has audio inputs and outputs
suitable for connecting analog or digital video
recorders, including VCRs and HDD/DVD
recorders.
1 Connect a audio outputs on the recorder
to the DVR/VCR AUDIO inputs on this
receiver.
Use a stereo RCA phono cable for the audio
connection.
2 Connect a audio inputs on the recorder
to the DVR/VCR AUDIO outputs on this
receiver.
Use a stereo RCA phono cable for the audio
connection.
3 If your video component has a digital
audio output, connect it to a digital input on
this receiver.
The example shows a recorder connected to
the
DIGITAL OPTICAL IN 2 (DVR/VCR)
input.
1
Connecting an IR receiver
If you keep your stereo components in a
closed cabinet or shelving unit, or you wish to
use the sub zone remote control in another
zone, you can use an optional IR receiver
(such as a Niles or Xantech unit) to control
your system instead of the remote sensor on
the front panel of this receiver.
2
1 Connect the IR receiver sensor to the
IR IN jack on the rear of this receiver.
For more information on connecting the IR
receiver, see the Installation Instructions for
the IR Receiver.
AUDIO
DIGITAL
BD/DVD MULTI CH IN
BD/DVD IN
HDMI
ANTENNA
AM
LOOP
FRONT
L
R
L
R
CENTER
SURROUND
COAXIAL
(CD)
IN
1
(CD-R/TAPE)
IN
1
1
-
2
(DVR/VCR)
IN
2
OPTICAL
ASSIGNABLE
IR
ASSIGNABLE
OUT
IN
DVR/VCR
TV/SAT
L
R
OUT
TV/SAT
IN
BD/DVD
IN
OUT
IN
IN
IN
CD-R/TAPE
CD
SUBWOOFER
IN
L
R
DIGITAL
OUT
IN
DVR/VCR
COAXIAL
OPTICAL
(CD)
IN
1
(DVR/VCR)
IN
2
R
L
AUDIO IN
IN
R
L
AUDIO OUT
PLAY
OUT
REC
DIGITAL OUT
OPTICAL
COAXIAL
3
2
1
DVR, VCR, LD
p
laye
r
, etc.
This
r
eceive
r
Note
1 If your video component only has an coaxial digital output, you can connect it to the coaxial input on this receiver using an
coaxial cable. When you set up the receiver you’ll need to tell the receiver which input you connected the component to (see
Choosing the input signal
on page 29).
2 • Remote operation may not be possible if direct light from a strong fluorescent lamp is shining on the IR receiver remote
sensor window.
• Note that other manufacturers may not use the IR terminology. Refer to the manual that came with your component to check
for IR compatibility.
03_connecting_up.fm 13 ページ ２００９年３月２４日 火曜日 午後７時８分
