Pioneer SX-20-K Service Manual Download Page 19

Page: 19 / 65

SX-20-K

Yes

No • JACK103 solder is defective.

• C703L or C703R solder is defective.

IC605 is defective or communication
defective or its solder is defective.

Yes

IC605 is defective or communication
defective or its solder is defective.

PHONO No sound

Does a sound come

out from SACD/CD input?

See "Speaker_A No Sound".

A sound does not come out
fromPHONO input.

Is there signal in

IC700 pin 3/pin 5?

(Check the C703L/R + pin.)

Yes

Is there signal in

IC605 pin 4/pin 29?

(Check the C710L/R + pin.)

Yes

Is there signal in

IC700 pin 1/pin 7?

(Check the C708L/R + pin.)

Is there DC+6V in IC700 pin 8?

(Check the R708R.)

Is there DC-6V in IC700 pin 4?

(Check the R708L.)

[Product state]
• Power cord connection (230 V/50 Hz)
• Unit POWER SW: ON
• Power ON operation by remote control

• SPEAKER-A selection
• INPUT: PHONO

[Product state]
• Power cord connection (230 V/50 Hz)
• Unit POWER SW: ON
• Power ON operation by remote control

• SPEAKER-A selection
• INPUT: TUNER (FM/AM)
• Tuner setting: FM

• IC105 or IC106 is defective or its
solder is defective.
• Check the

15 V power supply.

• IC101 is defective or its solder is
defective.
• PACK101 solder is defective.

No C708L, C708R, C710L, C710R

are defective or those solders are
defective.

IC700 is defective or its solder is
defective.

PACK101 is defective or its solder is
defective.

C113L or C113R is defective or its
solder is defective.

Yes

TUNER No sound

Does a sound come

out from SACD/CD input?

See "Speaker_A No Sound".

A sound does not come out
from TUNER input.

Is there signal in

PACK101 pin 7/pin 8?

(Check the C113L/R - pin.)

Is there signal in

IC605 pin 5/pin 28?

(Check the C113L/R + pin.)

Is there DC+5V in PACK101

pin 5? (Check the R708R

for +6 V, R708L for -6 V.)

Is there communication waveform

in TUNER_SCLK and TUNER_SDIO?

(Check the J405 for TUNER_SCLK,

J406 for TUNER_SDIO.)

•  IC103 is defective or its solder is
defective.
•  BD121 solder is defective.
•  D520 is defective or its solder is
defective.
• Check the

15 V power supply.

Summary of Contents for SX-20-K


































































Search results

Summary of Contents for SX-20-K

Reviews:

Related manuals for SX-20-K

Brands by name

Popular brands

Pioneer SX-20-K, Service Manual

Search results

Summary of Contents for SX-20-K

Reviews:

Related manuals for SX-20-K

Brands by name

Popular brands