Pioneer Super Tuner IIID DEH-P450MP, Operation Manual

Page: 16 / 136

Introduction of advanced
built-in CD player operation
1 2
1 RPT indicator
Shows when repeat play is turned on.
2 Function display
Shows the function status.
% Press FUNCTION to display the function
names.
Press FUNCTION repeatedly to switch be-
tween the following functions:
RPT (repeat play) RDM (random play)
SCAN (scan play) PAUSE (pause)
FF/REV (search method) TAG (ID3 tag dis-
play)
# To return to the playback display, press BAND .
Notes
! When playing audio data (CD-DA), it is not ef-
fective even if you turn
TAG (ID3 tag display)
on. (Refer to page 23.)
! If you do not operate the function within about
30 seconds, the display is automatically re-
turned to the playback display.
Repeating play
Repeat play lets you hear the same track over
again.
1 Press FUNCTION to select RPT.
Press FUNCTION until RPT appears in the dis-
play.
2 Press a to turn repeat play on.
RPT :ON appears in the display. The track cur-
rently playing will play and then repeat.
3 Press b to turn repeat play off.
RPT :OFF appears in the display. The track cur-
rently playing will continue to play and then
play the next track.
Note
If you perform track search or fast forward/re-
verse, repeat play is automatically cancelled.
Playing tracks in a random
order
Random play lets you play back tracks on the
CD in a random order.
1 Press FUNCTION to select RDM.
Press FUNCTION until RDM appears in the
display.
2 Press a to turn randomplay on.
RDM :ON appears in the display. Tracks will
play in a random order.
3 Press b to turn randomplay off.
RDM :OFF appears in the display. Tracks will
continue to play in order.
Scanning tracks of a CD
Scan play lets you hear the first 10 seconds of
each track on the CD.
1 Press FUNCTION to select SCAN.
Press FUNCTION until SCAN appears in the
display.
Built-in CD Player
En
16
Section
05
HHHHHHHHHHHHHH