Pioneer Super Tuner IIID DEH-4250SD Installation Manual Download Page 5

23. To rear output or 

subwoofer output

26. Power amp 

 (sold separately)

1. This product

3. Front output

5. Fuse (10 A)

2. Rear output or

subwoofer output

4. Wired remote input 

Hard-wired remote control 
adaptor can be connected 
(sold separately).

6. Antenna jack

25. Connect with RCA cables  

 (sold separately)

24. To front output

26. Power amp 

 (sold separately)

29. Perform these connections

  when using the optional
 amplifier.

28. System remote control

27. Blue/white
 

Connect to system control terminal of the

 

power amp or auto-antenna relay control

 

terminal (max. 300 mA 12 V DC).

14. Front speaker

14. Front speaker

30. Rear speaker

or subwoofer

30. Rear speaker

or subwoofer

7. Yellow 
 

Connect to the constant 12 V supply terminal.

8. Red 
 

Connect to terminal controlled by 

 

ignition switch (12 V DC).

9.  Black (chassis ground) 
 

Connect to a clean, paint-free metal location.

15. Left

16. Right

22. With a 2 speaker system, do not connect

  anything to the speaker leads that are
  not connected to speakers.

14. Front speaker

21. Rear speaker

10. White

12. Gray

13. Gray/black

11.  White/black

17. Green

19. Violet

18. Green/black

20. Violet/black

14. Front speaker

21. Rear speaker

32. Subwoofer (4 

Ω

)

33. When using a subwoofer of 70 W (2 

Ω

), be sure to connect

  with Violet and Violet/black leads of this unit. 
  Do not connect anything with Green and Green/black leads. 

35. Subwoofer 

 (4 

Ω

 2

34. Not used.

31. Note 
 

Change the initial setting of this unit. 

  The subwoofer output of this unit is monaural.

7. Yellow 
 

Connect to the constant 12 V supply terminal.

8. Red 
 

Connect to terminal controlled by 

 

ignition switch (12 V DC).

9.  Black (chassis ground) 
 

Connect to a clean, paint-free metal location.

15. Left

16. Right

14. Front speaker

10. White

12. Gray

13. Gray/black

11.  White/black

17. Green

19. Violet

18. Green/black

20. Violet/black

14. Front speaker

27. Blue/white
 

Connect to system control 

 

terminal of the power amp or 

 

auto-antenna relay control

  

terminal (max. 300 mA 12 V DC).

32. Subwoofer (4 

Ω

)

17. Green

19. Violet

18. Green/black

20. Violet/black

1. This product

3. Front output

5. Fuse (10 A)

2. Rear output or

subwoofer output

4. Wired remote input 

Hard-wired remote control 
adaptor can be connected 
(sold separately).

6. Antenna jack

Fig. 1

圖1

Fig. 2

圖2

Summary of Contents for Super Tuner IIID DEH-4250SD









Reviews: