1
Touch Dolby Pro Logic II.
2
Touch any of the following touch panel
keys to select the desired mode.
!
Movie
–
The Movie mode suitable for movie
playback
!
Music
–
The Music mode suitable for music
playback
!
Matrix
–
The Matrix mode for when FM
radio reception is weak
!
Off
–
Turn Dolby Pro Logic II off
!
Music Adjust
–
Adjust the Music mode
#
You can operate
Music Adjust
only when
Music
has been selected.
Adjusting the Music mode
You can adjust the Music mode with the fol-
lowing three controls.
!
Panorama (
Panorama
) extends the front
stereo image to include the surround
speakers for an exciting
“
wraparound
”
ef-
fect.
!
Dimension (
Dimension
) allows you to gra-
dually adjust the sound field either towards
the front or the rear.
!
Center Width Control (
Center Width
) al-
lows center-channel sounds to be posi-
tioned between the center speaker and the
left/right speakers. It improves the left-cen-
ter-right stage presentation for both the dri-
ver and the front passenger.
1
Touch Dolby Pro Logic II.
2
Touch Music and then touch
Music Adjust.
#
You can operate
Music Adjust
only when
Music
has been selected.
3
Touch
a
or
b
to select Panorama (pa-
norama).
Each time you touch
a
or
b
selects the item
in the following order:
Panorama
(panorama)
—
Dimension
(dimen-
sion)
—
Center Width
(center width)
4
Touch
d
to turn the panorama control
on.
#
To turn the panorama control off, touch
c
.
5
Touch
b
to select Dimension and then
touch
c
or
d
to adjust front/rear speaker
balance.
Each time you touch
c
or
d
it moves the
sound towards the front or the rear.
+3
to
-3
is displayed as the front/rear speaker
balance moves from front to rear.
6
Touch
b
to select Center Width and
then touch
c
or
d
to adjust the center
image.
Each time you touch
c
or
d
it gradually
spreads the center channel sound into the
front left and right speakers over a range
0
to
7
.
3
is the default and it
’
s recommended for
most recordings.
0
places all center sound in
the center speaker.
7
places all center sound
equally in the left/right speakers.
Setting the speaker setting
You need to make with/without (or yes/no) and
size (bass reproducing capacity) selection/ad-
justments depending on the installed speak-
ers. The size needs to be set to
Large
(large) if
the speaker is capable of reproducing sounds
of about 100 Hz or below. Otherwise select
Small
(small).
!
Low frequency range is not output if the
subwoofer is set to
Off
and the front and
rear speakers set to
Small
or
Off
.
!
It is imperative that non-installed speakers
be set to
Off
.
!
Set the front or rear speaker to
Large
if the
speaker is capable of reproducing bass
content, or if no subwoofer is installed.
1
Touch Speaker Setting.
2
Touch
a
or
b
to select the speaker to
be adjusted.
Each time you touch
a
or
b
selects the speak-
er in the following order:
Available accessories
En
87
Section
19
A
vailable
accessories
