Pioneer SUPER TUNER III D FH-P4200MP Service Manual Download Page 67

Page: 67 / 94

FH-P4200MP/XU/UC

How to hold the Mechanism Unit

1. Hold the top and bottom frame.
2. Do not squeeze top frame's front portion too tight,

because it is fragile.

Removing the Upper and Lower Frames

1. With a disc clamped, remove the four springs (A),

the two springs (B), the two springs (C), and the

four

screws.

2. To remove the upper frame, open it on the fulcrum
A.
3. While lifting the carriage mechanism, remove the
three

dampers.

4. With the frames removed, insert the connectors

coming from the main unit and eject the disc.

Caution: Before installing the carriage mechanism in

the frames, be sure to apply some alcohol to the

dampers and set the mechanism to the clamp mode.

Do not squeeze.

Lower Frame

Damper

Carriage Mechanism

Damper

Upper Frame

Summary of Contents for SUPER TUNER III D FH-P4200MP































































































Search results

Summary of Contents for SUPER TUNER III D FH-P4200MP

Reviews:

Related manuals for SUPER TUNER III D FH-P4200MP

Brands by name

Popular brands

Pioneer SUPER TUNER III D FH-P4200MP, Service Manual

Search results

Summary of Contents for SUPER TUNER III D FH-P4200MP

Reviews:

Related manuals for SUPER TUNER III D FH-P4200MP

Brands by name

Popular brands