Adjusting loudness
Loudness compensates for deficiencies in the
low- and high-sound ranges at low volume.
1 Press AUDIO to select Loud.
Press
AUDIO
until
Loud
appears in the dis-
play.
2 Press
a
to turn loudness on.
Loud :ON
appears in the display.
3 Press
b
to turn loudness off.
Loud :OFF
appears in the display.
Using nonfading output
When the nonfading output setting is on, the
audio signal does not pass through this unit
s
low pass filter (for the subwoofer), but is out-
putted through the RCA output.
1 Press AUDIO to select nonfading output
on/off setting.
When the subwoofer controller setting is only
P/O:Full
, you can switch to the nonfading out-
put on/off setting. (Refer to page 43.)
Press
AUDIO
until
NoFAD
appears in the dis-
play.
2 Press
a
to turn nonfading output on.
NoFAD:ON
appears in the display. Nonfading
output is now on.
#
To turn nonfading output off, press
b
.
Adjusting nonfading output level
When the nonfading output is on, you can ad-
just the level of nonfading output.
1 Press AUDIO to select nonfading output
setting.
Press
AUDIO
until
NoFAD: 0
appears in the
display.
2 Press
a
or
b
to adjust the nonfading
output level.
Each press of
a
or
b
increases or decreases
the level of the non fading.
+6
24
is dis-
played as the level is increased or decreased.
Press
a
or
b
until you see the desired value
displayed.
Using subwoofer output
This unit is equipped with a subwoofer output
which can be turned on or off. When a sub-
woofer is controlled with this unit, first, switch
the RCA output setting to subwoofer, then
turn the subwoofer output on. For more de-
tails, see
Switching the RCA output setting
on
page 43.
1 Press AUDIO to select Phase:NOR.
Press
AUDIO
until
Phase:NOR
appears in the
display.
#
When the RCA output setting is
P/O:Subw
,
you can select
Phase:NOR
.
2 Press
a
to turn the subwoofer output
on.
Phase:NOR
appears in the display. Subwoofer
output is now on.
#
To turn subwoofer output off, press
b
.
3 Press
c
or
d
to select the phase of sub-
woofer output.
Press
c
to select reverse phase and
Phase:REV
appears in the display. Press
d
to
select normal phase and
Phase:NOR
appears
in the display.
Audio Adjustments
En
35
English
Section
09