11
Customizing preferences
Chapter
55
En
Customizing pr
efer
ences
p
When the GPS antenna is connected to
this product, “
OK
” is displayed.
When the GPS antenna is not connected
to this product, “
Not OK
” is displayed.
p
If reception is poor, please change the
installation position of the GPS antenna.
2
Positioning Status
Indicates the current GPS positioning sta-
tus.
•
2D Positioning
:
The status when the signals from three
satellites are received.
•
3D Positioning
:
The status when the signals from four or
more satellites are received.
3
Back Signal
When the shift lever is shifted to “
R
”, the
signal switches to “
High
” or “
Low
”. (One
of these is displayed depending on the ve-
hicle.)
Switching the App launch assist
function (for iPhone)
You can set whether to launch the AppRadio
app automatically when you tap [
Apps
] icon
on the Home screen.
1 Display the “System” screen.
Ü
For details, refer to
Customizing the
system settings
on page 48.
2 Tap [App launch assist].
Tapping [
App launch assist
] changes the set-
tings as follows:
•
On
(default)
:
Activates the App launch assist function.
•
Off
:
Deactivates the App launch assist func-
tion.
Displaying the firmware version
If this product fails to operate properly, you
may need to consult your dealer for repair. In
such cases, you may be asked to specify the
system version. Perform the following proce-
dure to check the firmware version of this
product.
1 Display the “System” screen.
Ü
For details, refer to
Customizing the
system settings
on page 48.
2 Tap [Firmware Version Information] to
display to the firmware version of this
product.
Updating the firmware version
You can update the firmware version of this
product by using the USB memory device con-
nected.
p
Before updating, check your firmware
version and prepare the firmware update
USB memory device by downloading the
newer firmware file from the pioneer web
site.
p
“
Firmware Update
” can be set only when
the vehicle is stopped.
CAUTION
Never turn this product off while the firmware
is being updated.
1 Connect the firmware update USB
memory device to the USB port on this
product.
2 Display the “System” screen.
Ü
For details, refer to
Customizing the
system settings
on page 48.
3 Tap [Firmware Update].
The “
Firmware Update
” screen appears.
4 Tap [Continue] to display the data
transfer mode.
n
Follow the on-screen instructions to finish
updating the firmware.
