Pioneer SGY-HR500, User Manual

Page: 15 / 40

15
EN
Putting the Sensor on Your Body
Do not use excessive force pulling or •
adjusting while wearing. Doing so may
break the strap and cause an injury.
Be careful not to bend the electrode •
pad. Doing so may cause it to
malfunction.
5. Place the electrode pad
against the chest.
Rotate the strap to adjust the position
of the electrode pad so it attaches
tightly to your chest.
Attach the strap firmly so it does not •
slip down when riding.
Confirming Connection to the
Cyclocomputer
After attaching the Heart rate sensor,
pair the sensor with your cyclocomputer.
Refer to your cyclocomputer’s ANT+
pairing instructions.
Pairing with the cyclocomputer may •
not be possible due to the influence
of the 2.4 GHz frequency band. If
pairing fails, try again someplace
where there is no interference from
microwaves, radio waves, or wireless
equipment.