Pioneer SD-643HD5, Service Manual

Page: 199 / 206

199
SD-533HD5, SD-643HD5
•
HOW TO REMOVE BLOCKING FROM A PROGRAM IN
PROGRESS
If you choose a program that has a rating higher than your
program blocking rating, the picture and sound will cut off. If
you press the SET button on the remote control, the pass-
word screen will appear.
If you enter your password the blocking will be removed for
this viewing only.
NOTE:
If the monitor power is turn OFF then turned ON again, the Program Blocked
screen will appear again and you'll need to re-enter the password to view the
program.
PROGRAM BLOCKED
MPAA RA T I NG
: R
•
REMOVING BLOCKING IN MULTI-SCREEN MODE
•
Just as in normal single-screen mode, programs are
blocked in SEARCH screen mode, but blocking can be
removed only from the Main picture.
To remove blocking from Search picture screen, switch to
the Main picture for that channel and then remove blocking.
•
When viewing in FREEZE screen mode, only programming
on the Moving screen to the left will be blocked and the
programming on the Still screen to the right will be
displayed as is.
•
When blocking is on during SEARCH screen mode, the
screen at search picture side will be blacked out and won't
display: “Key mark”.
«
Block
Moving screen
Still screen
A . T N A 6 3
Still screen
A . T N A 6 3
PROGRAM
B LOCKED
: PG
If you forget the password:
When the message ‘INPUT YOUR PASSWORD’ in step 3 is
displayed, press the RETURN button on the front panel and hold it
down for 3 seconds or longer.
The password reverts to “1234”.
CHANGING PASSWORD