108
The MCACC PRO menu
11
Acoustic Cal EQ
Use this to display the calibration values for the frequency response of the various channels set in the different
MCACC presets. See
Acoustic Calibration EQ Adjust
for more on this.
1 Select ‘Acoustic Cal EQ’ from the MCACC Data Check menu.
2 When ‘Ch’ is highlighted, use
i
/
j
to select the channel.
The calibration value for the frequency response of the selected channel stored at the selected MCACC preset
and its graph are displayed.
3 Press
k
to highlight ‘MCACC’, then use
i
/
j
to select the MCACC preset you want to
check.
Group Delay
Use this to display the calibrated speaker group delay results. See
Better sound using Phase Control
for more on this.
1 Select ‘Group Delay’ from the MCACC Data Check menu.
2 When ‘Channel’ is highlighted, use
k
/
l
to select the channel you want to check.
The result of group delay calibration for the selected channel is displayed.
When measurements have been performed with
Full Auto MCACC
selected at
MCACC PRO
or with
ALL
or
Full Band Phase Ctrl
selected when
Auto MCACC
is selected, the graph before group delay calibration is also
displayed.
When
After
is selected at
Calibration
, the group delay after calibration is displayed. Compared to when
Before
is selected, with
After
there is less difference in the delay between frequency bands and the group delay between
the different channels is uniform, allowing you to check the full band phase control effect.
No Data
is displayed if the selected group delay has not been measured.
Data Management
This system allows you to store up to six MCACC presets, allowing you to calibrate your system for different listen-
ing positions (or frequency adjustments for the same listening position). This is useful for alternate settings to
match the kind of source you’re listening to and where you’re sitting (for example, watching movies from a sofa,
or playing a video game close to the TV).
From this menu you can copy from one preset to another, name presets for easier identification and clear any
ones you don’t need.
!
This can be done in
Automatically conducting optimum sound tuning (Full Auto MCACC)
, either of which you should have already completed.
1 Select ‘Data Management’ from the MCACC PRO menu, then press ENTER.
2 Select the setting you want to adjust.
!
Memory Rename
– Name your MCACC presets for easy identification (see
on
).
!
MCACC Memory Copy
– Copy settings from one MCACC preset to another (see
).
!
MCACC Memory Clear
– Clear any MCACC presets that you don’t want (see
on
).
Renaming MCACC presets
If you have several different MCACC presets that you’re using, you may want to rename them for easier
identification.
1 Select ‘Memory Rename’ from the Data Management setup menu.
2 Select the MCACC preset you want to rename, then select an appropriate preset name.
Use
i
/
j
to select the preset, then
k
/
l
to select a preset name.
3 Repeat for as many MCACC presets as necessary, then press RETURN when you’re finished.
You will return to the
Data Management
setup menu.
Copying MCACC preset data
If you want to manually adjust the Acoustic Calibration EQ (see
), we recom-
mend copying your current settings to an unused MCACC preset. Instead of just a flat EQ curve, this will give you
a reference point from which to start.
!
The settings made in
Automatically conducting optimum sound tuning (Full Auto MCACC)
or
on
.
1 Select ‘MCACC Memory Copy’ from the Data Management setup menu.
2 Select the setting you want to copy.
!
All Data
– Copies all the settings of the selected MCACC preset memory.
!
Level & Distance
– Copies only the channel level and speaker distance settings of the selected MCACC pre-
set memory.
3 Select the MCACC preset you’ll be copying the settings ‘From’, then specify where you
want to copy them ‘To’.
Make sure you don’t overwrite an MCACC preset you’re currently using (this can’t be undone).
4 Select ‘OK’ to confirm and copy the settings.
When
MCACC Memory Copy?
is displayed, select
YES
. If
NO
is selected, the memory is not copied.
Completed!
shows in the GUI screen to confirm the MCACC preset has been copied, then you automatically
return to the
Data Management
setup menu.
Clearing MCACC presets
If you are no longer using one of the MCACC presets stored in memory, you can choose to clear the calibration
settings of that preset.
1 Select ‘MCACC Memory Clear’ from the Data Management setup menu.
2 Select the MCACC preset you want to clear.
Make sure you don’t clear an MCACC preset you’re currently using (this can’t be undone).
3 Select ‘OK’ to confirm and clear the preset.
When
MCACC Memory Clear?
is displayed, select
YES
. If
NO
is selected, the memory is not cleared.
Completed!
shows in the GUI screen to confirm the MCACC preset has been cleared, then you automatically
return to the
Data Management
setup menu.
