52
SC-09TX
1
2
3
4
A
B
C
D
E
F
1
2
3
4
6.2 TEST MODE
HDMI CEC
Test mode
FAN ON/OFF
1
2
A 1-kHz square-wave signal is
output from the HDMI CEC output
connector of the unit.
When the command is issued
again, output of the 1-kHz square-
wave signal is turned off.
Each time the code from the
remote control unit is received, the
all fans are turned ON or OFF.
While the fans are on, they operate
at high speed.
The fan for HDMI is not turned on
or off but continues to operate.
No.
Item
Key Operation
Description
OSD
Preparation
Set the test code preset for any function, using the supplied remote control unit, as follows:
1
While holding the MULTI OPERATION key pressed, press the SETUP key.
"SETUP" is displayed in the display of the remote control unit.
2
Select "PRESET" and press ENTER key.
3
Select one of the multi-control (function) keys for which the test code is to be registered.
If the customer's remote control unit is used, there is a possibility that registered settings will be overwritten and lost.
(Be sure to select a function key for which no setting has been registered.)
If the customer's remote control unit is used, restore the preset values after servicing is finished.
(Be sure to make note of the customer's preset ID beforehand.)
4
Select "I" press ENTER key.
5
Select "INSTSERV" press ENTER key.
6
Select "LD 150" press ENTER key.
7
Press and hold the MULTI OPERATION key for 2 seconds to finish test code preset.
For details on preset code setting, refer to Page 112 of the Operating Instructions.
How to Enter Test Mode
Press the MENU key of the function for which the test code has been registered.
Note : If enter this Test Mode, the user settings (MCACC and tuner preset) will be cleared.
How to Exit Test Mode
Press the 9 key of the function for which the test code has been registered.
The unit exits Test mode and enters Standby mode.
Press the 0 key of
the function for
which the test code
has been registered.
Press the 7 key of
the function for
which the test code
has been registered.
Summary of Contents for SC-LX90
