Pioneer SC-LX78 Operating Instructions Manual Download

Page: 61 / 141

Basic playback

Bluetooth

ADAPTER for Wireless Enjoyment of Music

This receiver

Remote control

operation

Music data

Bluetooth

ADAPTER

Bluetooth

wireless

technology enabled device:
cell phone

Bluetooth

wireless

technology enabled device:
Digital music player

Device not equipped with

Bluetooth

wireless technology:

Digital music player

Bluetooth

audio transmitter

(sold commercially)

About one minute is required between turning the power on and completion of startup.

Wireless music play

When the

Bluetooth

ADAPTER (AS-BT100 or AS-BT200) is connected to this unit, a product equipped with

Bluetooth

wireless technology (portable cell phone, digital music player, etc.) can be used to listen to music wire-

lessly. Also, by using a commercially available transmitter supporting

Bluetooth

wireless technology, you can

listen to music on a device not equipped with

Bluetooth

wireless technology. The AS-BT100 and AS-BT200 models

supports SCMS-T contents protection, so music can also be enjoyed on devices equipped with SCMS-T type

Bluetooth

wireless technology.

Remote control operation

The remote control supplied with this unit allows you to play and stop media, and perform other operations.

It must be necessary that the

Bluetooth

wireless technology enabled device supports AVRCP profiles.

Remote control operations cannot be guaranteed for all

Bluetooth

wireless technology enabled devices.

Pairing the

Bluetooth

ADAPTER and

Bluetooth

wireless technology device

“Pairing” must be done before you start playback of

Bluetooth

wireless technology content using the

Bluetooth

ADAPTER. Make sure to perform pairing the first time you operate the system or any time pairing data is cleared.
The pairing step is necessary to register the

Bluetooth

wireless technology device to enable

Bluetooth

communi-

cations. For more details, see also the operating instructions of your

Bluetooth

wireless technology device.

Pairing is required when you first use the

Bluetooth

wireless technology device and

Bluetooth

ADAPTER.

To enable

Bluetooth

communication, pairing should be done with both your system and

Bluetooth

wireless

technology device.

If the

Bluetooth

wireless technology device’s security code is “0000”, there is no need to make the security code

setting on the receiver. Press

BT ADPT

to set the

ADAPTER PORT

input, then conduct the pairing operation

on the

Bluetooth

wireless technology device. If pairing is successful, there is no need to performing the pairing

operation below.

When using the AS-BT200 only: This unit complies with

Bluetooth

Specifications Ver. 2.1. When this unit and

another device equipped with

Bluetooth

wireless technology both comply with

Bluetooth

Specification Ver. 2.1,

pairing of the two may be possible without the need for inputting a password.

In this case, a passcode may be displayed on this receiver and on the device equipped with

Bluetooth

wire-

less technology. If this happens, check that the same passcode is displayed on this receiver and the device
equipped with

Bluetooth

wireless technology, then press

ENTER

. After this, also perform the connection

operation on the

Bluetooth

device to be connected. If the passcode does not match the code displayed on the

Bluetooth

device to be connected, press

RETURN

to cancel pairing, then try starting over.

Press

BT ADPT

to set the

ADAPTER PORT

input, then conduct the pairing operation on the

Bluetooth

wireless

technology device. If pairing is successful, there is no need to performing the pairing operation below.

Pair one unit at a time.

When connecting this receiver by

Bluetooth

connections with a device equipped with the

Bluetooth

function to

listen to music, do not connect any devices other than this receiver by

Bluetooth

connection to the

Bluetooth

equipped device. If a

Bluetooth

connection is already established with a device other than this receiver, discon-

nect the other device before connecting this receiver.

1 Press BT ADPT on the remote control to switch the receiver to ADAPTER PORT input.
2 Press TOP MENU to select Bluetooth Setup.
3 Use

to select ‘PIN’ then press ENTER.

4 Use

to select one of PIN codes 0000, 1234 or 8888, then press ENTER.

You can use any of

0000

1234

8888

PIN codes.

Bluetooth

wireless technology device using any other PIN

code cannot be used with this receiver.

5 Press the RETURN button twice to exit Bluetooth Setup.
6 Switch on the

Bluetooth

wireless technology device that you want to make pair, place it

near the receiver and set it to the pairing mode.
7 From the

Bluetooth

wireless technology device list, select

Bluetooth

ADAPTER and enter

the PIN code selected in step 4.
8 Check to see that the

Bluetooth

ADAPTER is detected by the

Bluetooth

wireless technology

device.

If the receiver and

Bluetooth

wireless technology device are not paired, start over from step 6.

Notes

The PIN code may in some cases be referred to as PASSKEY.

For information on enabling pairing on the

Bluetooth

wireless technology device, connection procedures, etc.,

see the

Bluetooth

wireless technology device’s operating instructions.

Summary of Contents for SC-LX78














































































































































Search results

Summary of Contents for SC-LX78

Reviews:

Related manuals for SC-LX78

Brands by name

Popular brands

Pioneer SC-LX78, Operating Instructions Manual

Search results

Summary of Contents for SC-LX78

Reviews:

Related manuals for SC-LX78

Brands by name

Popular brands