14
SBX-D201
Point a remote controller at an infrared ray receiver when pressing a button. Infrared rays
from a remote controller can reach an object from about 5 m away.
Dispose of used button cells in accordance with regulations of the local government or
your community.
Prepare a remote controller
Pull out an insulation sheet before use.
Replace a button cell of a remote controller
Replace the old button cell with a new one (CR2032) if a remote controller does not operate
properly or a signal reaching distance becomes shorter.
1.
Slide-open a buttery lid while pressing a hole on the rear side of the remote controller with
a pointed object.
2.
Replace the old button cell with a new one (CR2032) according to the indication for cathode
and anode of cell on the remote controller.
3.
Close a battery lid.
Insulation sheet
Connect Speaker Bar with an analog device
Connect an analog input terminal of the unit with an analog output terminal of an audio device
using an analog audio cable (diameter of a plug: 3.5 mm).
Television and
any other
device
DC IN 24V
AUX
IN
INFRARED
RECEIVER
SPEAKERS
R
L
HDMI
IN
HDMI
(ARC)
AUX
IN
DC IN 24V
Analog audio cable
（
accessory
）
LINE OUT
