CAUTION:
THE STANDBY/ON BUTTON IS
SECONDARY CONNECTED AND THEREFORE
DOES NOT SEPARATE THE UNIT FROM MAINS
POWER IN STANDBY POSITION. therefore install
the unit suitable places easy to disconnect the
MAINS plug in case of the accident. The MAINS
plug of unit should be unplugged from the wall
socket when left unused for a long period of
time.
H017B_En
Operating Environment
H045_En
Operating environment temperature and
humidity:
+5ºC – +35ºC (+41ºF – +95ºF); less than 85%RH
(cooling vents not blocked)
Do not install in the following locations
÷
Location exposed to direct sunlight or strong
÷
artificial light
÷
Location exposed to high humidity, or poorly
ventilated location
VENTILATION:
European, UK, Australian, New Zealand,
Hong Kong and Taiwanese models:
When installing this unit, make sure to
leave space around the unit for ventilation
to improve heat radiation (at least 10 cm at
top, 10 cm at rear, and 10 cm at each side).
All other models:
When installing this unit, make sure to
leave space around the unit for ventilation
to improve heat radiation (at least 20 cm at
top, 15 cm at rear, and 15 cm at each side).
WARNING:
Slots and openings in the
cabinet are provided for ventilation and to
ensure reliable operation of the product
and to protect it from overheating, to
prevent fire hazard, the openings should
never be blocked and covered with items,
such as newspapers, table-cloths, curtains,
etc. Also do not put the apparatus on the
thick carpet, bed, sofa, or fabric having a
thick pile.
H040 En
E
NERGY
S
TAR
®
and the
E
NERGY
S
TAR
certification mark are
registered US marks.
K001B_En
Energy-saving design
This system is designed to use 0.39 W of
electricity when power is switched to standby.
Australian model:
HTS.book 3 ページ ２００３年２月２５日 火曜日 午後１時４５分
