2
Connecting wires with RCA plugs (sold sepa-
rately)
3
From RS-P99 (sold separately) etc. (RCA out-
put)
Solderless terminal
connections
!
Do not connect cords with exposed core
wires to the amplifier power terminals
(power terminal, ground terminal, system
remote control terminal), since disconnec-
tion or breakage may result in fire or short-
circuit.
!
Periodically inspect and tighten the wire as
necessary.
!
Do not solder or bind the ends of the
twisted wires.
!
Fasten while ensuring the insulating
sheath of the wire is not clamped.
!
Use the supplied hexagonal wrench to
tighten and loosen the terminal screw of
the amplifier and use it to securely fasten
the wire. Be careful to avoid excessive tigh-
tening of this screw, which may damage
the wire.
CAUTION
Use the supplied hexagonal wrench to tighten
the screws when fastening wires to the terminal.
The use of a long, commercially available hexago-
nal wrench may exert excessive torque, possibly
resulting in damage to the terminals and
wires.
Connecting the power
terminal
WARNING
!
The use of a special red battery and ground
wire RD-228, available separately, is recom-
mended. Connect the battery wire directly to
the car battery positive terminal (
+
) and the
ground wire to the car body.
!
If the battery wire is not securely fixed to the
terminal using the terminal screws, there is a
risk of overheating, malfunction and injury, in-
cluding minor burns.
1
Route battery wire from engine com-
partment to the vehicle interior.
After completing all other amplifier connec-
tions, finally connect the battery wire terminal
of the amplifier to the positive (
+
) battery
terminal.
1
2
3
4
5
6
1
Positive (
+
) terminal
2
Engine compartment
3
Vehicle interior
4
Fuse (40 A) × 2
5
Insert the O-ring rubber grommet into the
vehicle body.
6
Drill a 14 mm hole into the vehicle body.
2
Connect the wires to the terminal.
Fix the wires securely with the terminal
screws.
En
11
Section
03
Connecting
the
units
Connecting the units
