En
11
Op
eration
RHYTHM FX section
AUDIO
EFFECT
INSTRUMENT
OVER
DUB
EXIT
AUTO
4-BEAT
SEQUENCER
RHYTHM FX
BPM
V
BR
LEVEL
DELETE
KIC
K
SNA
RE
CLAP
HI H
AT
CY
MB
AL
OF
FS
ET
DELA
Y
REV
ADD
TR
ANS
RO
LL
INSTRUMENT
1
1
3
6
7
2
4
5
2
1
RHYTHM FX buttons
These turn the RHYTHM FX effects on and off.
2
RHYTHM FX indicator
This flashes when an effect is on.
3
RHYTHM FX control
This adjusts the selected RHYTHM FX effect.
4
DELETE button
This button can be used to delete the operations of the
[
RHYTHM FX
] buttons that were recorded using the 4-BEAT
SEQUENCER function, one button at a time.
5
Internal sound source volume adjustment buttons
These adjust the volume of the internal sound sources.
6
EXIT button
This lights when the 4-BEAT SEQUENCER function is on.
When the button is pressed, the 4-BEAT SEQUENCER function turns
off.
7
OVERDUB button
The 4-BEAT SEQUENCER function turns on.
The operations of the [
RHYTHM FX
] buttons are recorded and the
sound is played in a loop.
Using the RHYTHM FX function
1 Press one of the [RHYTHM FX] buttons.
Select the RHYTHM FX effect type.
The button that was pressed flashes.
!
Internal sound sources are preset at each of the [
KICK
], [
SNARE
],
[
CLAP
], [
HI HAT
] and [
CYMBAL
] buttons.
!
For details on the types of effects, see the Pioneer DJ support site
below.
http://pioneerdj.com/support/
2 Turn the [RHYTHM FX] control.
The effect is applied to the sound.
—
The strength of the effect increases when the control is turned
clockwise. The strength of the effect is maximum when the con-
trol is turned fully clockwise.
—
The strength of the effect decreases when the control is turned
counterclockwise. When turned fully counterclockwise, the
original sound is output, with no effect applied.
3 Press the [RHYTHM FX] control.
A sound processing or sound adding effect is applied, depending on the
type of effect that is selected.
!
The sound processing or sound adding effect changes according to
the strength with which the control is pressed in.
!
When the selected [
RHYTHM FX
] button is pressed again, the effect
turns off.
Using the 4-BEAT SEQUENCER function
The order and timing at which the [
RHYTHM FX
] buttons are pressed
are recorded and the sound is played in a loop.
1 Press the [OVERDUB] button.
When the [
OVERDUB
] button is pressed, the 4-BEAT SEQUENCER func-
tion turns on and the [
OVERDUB
] button flashes brightly.
While the [
OVERDUB
] button is flashing brightly, the operations of the
[
RHYTHM FX
] buttons are recorded and loop playback continues.
When the [
OVERDUB
] button is pressed again, it starts flashing
dimly and loop playback continues, but additional operations of the
[
RHYTHM FX
] buttons are not recorded.
!
When the 4-BEAT SEQUENCER function is on, RHYTHM FX effects
are only applied while the corresponding [
RHYTHM FX
] button is
being pressed.
2 While pressing the [DELETE] button, press the
[RHYTHM FX] button whose recorded operation you
want to delete.
When the [
DELETE
] button is pressed, the [
RHYTHM FX
] buttons whose
operations are recorded light. When a lit button is pressed, the button
turns off and the operation of that [
RHYTHM FX
] button which was
recorded is deleted.
3 Press the [EXIT] button.
When the [
EXIT
] button is pressed, all the operations of the
[
RHYTHM FX
] buttons that were recorded with the 4-BEAT SEQUENCER
function are deleted. The 4-BEAT SEQUENCER function turns off and
loop playback stops.
