What
’
s what
Right side
1
Front side
2
2
3
Back side
4
To adjust the switch, use a flathead screwdri-
ver if needed.
1
GAIN (gain) control
If output remains low, even when the car
stereo volume is turned up, turn controls to
lower level. If distortion occurs when the car
stereo volume is turned up, turn these con-
trols to higher level.
!
For use with an RCA equipped car stereo
(standard output of 500 mV), set to the
NORMAL
position. For use with an RCA
equipped Pioneer car stereo, with maxi-
mum output of 4 V or more, adjust level
to match that of the car stereo output.
!
If you hear too much noise when using
the speaker input terminals, turn the
gain control to higher level.
!
If using only one input plug, set the gain
controls for speaker outputs A and B to
the same position.
2
Terminal cover
Remove the cover before connecting the
amplifier. For details, refer to
3
Power indicator
The power indicator lights up to indicate
power ON.
4
INPUT (input) switch
Select
2CH
for two-channel input and
1CH
for one
–
channel input.
En
5
English
Section
01
Setting the unit
Summary of Contents for PRS-D800
Page 39: ...Es 39 Español ...
