Pioneer PRS-D1000M, Service Manual

Page: 2 / 38

PRS-D1000M/XU/UC
2
1 2 3 4
1 2 3 4
C
D
F
A
B
E
SAFETY INFORMATION
CAUTION
This service manual is intended for qualified service technicians; it is not meant for the casual do-it-yourselfer.
Qualified technicians have the necessary test equipment and tools, and have been trained to properly and safely repair
complex products such as those covered by this manual.
Improperly performed repairs can adversely affect the safety and reliability of the product and may void the warranty. If you
are not qualified to perform the repair of this product properly and safely, you should not risk trying to do so and refer the
repair to a qualified service technician.
WARNING
This product contains lead in solder and certain electrical parts contain chemicals which are known to the state of California
to cause cancer, birth defects or other reproductive harm.
Health & Safety Code Section 25249.6 - Proposition 65
-
Service Precaution
• You should conform to the regulations governing the product (safety, radio and noise, and other regulations),
and should keep the safety during servicing by following the safety instructions described in this manual.
• Be careful in handling ICs. Some ICs such as MOS type are so fragile that they can be damaged by
electrostatic induction.
• The area where the temperature gets high as a completely assembled product is the heat sink. As a unit, on
the other hand, sub-heat sink and the periphery of the sub-heat sink are the areas where the temperature
gets high.
• There is a danger for electrical shock in the periphery of an area where “High Voltage Attention” is indicated
on the printed circuit board due to a high voltage being generated during operation. Therefore, be careful
when working around such areas.