Introduction of advanced
tuner operation
3
1
2
1
LOC indicator
Shows when local seek tuning is on.
2
Preset number indicator
Shows what preset has been selected.
3
Function display
Shows the function status.
%
Press FUNCTION to display the function
names.
Press
FUNCTION
repeatedly to switch be-
tween the following functions:
BSM
(best stations memory)
LOCAL
(local
seek tuning)
#
To return to the frequency display, press
BAND
.
Note
If you do not operate the function within about 30
seconds, the display is automatically returned to
the frequency display.
Storing and recalling
broadcast frequencies
If you press any of the preset tuning buttons
1
6
you can easily store up to six broadcast
frequencies for later recall with the touch of a
button.
%
When you find a frequency that you
want to store in memory press a preset
tuning button 1
6 and hold until the preset
number stops flashing.
The number you have pressed will flash in the
preset number indicator and then remain lit.
The selected radio station frequency has been
stored in memory.
The next time you press the same preset tun-
ing button
1
6
the radio station frequency is
recalled from memory.
Notes
!
Up to 18 FMstations, 6 for each of the three
FMbands, and 6 AMstations can be stored in
memory.
!
You can also use
a
and
b
to recall radio sta-
tion frequencies assigned to preset tuning
buttons
1
6
.
Tuning in strong signals
Local seek tuning lets you tune in only those
radio stations with sufficiently strong signals
for good reception.
1 Press FUNCTION to select LOCAL.
Press
FUNCTION
until
LOCAL
appears in the
display.
2 Press
a
to turn local seek tuning on.
Local seek sensitivity (e.g.,
LOCAL 2
) appears
in the display.
3 Press
c
or
d
to set the sensitivity.
There are four levels of sensitivity for FMand
two levels for AM:
FM:
LOCAL 1
LOCAL 2
LOCAL 3
LOCAL 4
Tuner
En
13
English
Section
04
