Connecting the units
English
Connection Diagram
When not connecting a rear speak-
er lead to a Subwoofer (Fig. 1)
When using a Subwoofer without
using the optional amplifier (Fig. 2)
1. USB
cable
Connect to separately sold USB device.
2. This
product
3. Rear
output
4. iPod
5. Dock
connector
6. Interface
cable
7. Front
output
8. Antenna
jack
9. Subwoofer
output
10. Wired remote input
Hard-wired remote control adaptor can be
connected (sold separately).
11. IP-BUS input (Blue)
12. IP-BUS cable
13. Multi-CD player (sold separately)
14. Fuse (10 A)
15. Yellow
Connect to the constant 12 V supply terminal.
16. Red
Connect to terminal controlled by ignition
switch (12 V DC).
17. Orange/white
Connect to lighting switch terminal.
18. Black (chassis ground)
Connect to a clean, paint-free metal location.
19. White
20. White/black
21. Gray
22. Gray/black
23. Front speaker
24. Left
25. Right
26. Green
27. Green/black
28. Violet
29. Violet/black
30. Rear speaker
31. With a 2 speaker system, do not connect
anything to the speaker leads that are not
connected to speakers.
32. To rear output
33. To front output
34. To subwoofer output
35. Connect with RCA cables (sold separately)
36. Power amp (sold separately)
37. Blue/white
Connect to system control terminal of the
power amp or auto-antenna relay control
terminal (max. 300 mA 12 V DC).
38. System remote control
39. Perform these connections when using the
optional amplifier.
40. Subwoofer
41. Note
Change the initial setting of this unit.
The subwoofer output of this unit is
monaural.
42. Subwoofer (4
:
)
43. When using a subwoofer of 70 W (2
:
), be
sure to connect with Violet and Violet/black
leads of this unit. Do not connect anything
with Green and Green/black leads.
44. Not used.
45. Subwoofer (4
:
)
2
YRD5263AS̲inst.indd 17-20
2008/07/24 13:52:04