10
PRA-DW11
En
1
2
5V
G
G
12V
DC INPUT
Towards
front
②
④
②
④
Installation
①
③
①
③
7. Fasten the drive 2 mounting fixture
to the DVD-R/RW unit.
÷
Attach the
drive 2 mounting fixture
to the DVD-R/RW unit so that the
%
mark on the fixture is oriented
toward the front.
÷
Fasten the fixture in place by using
the four accessory flange screws
(black) and tightening in the order
1
=
2
=
3
=
4
.
%
mark
Drive 2
mounting fixture
8. Once the mounting fixture has been
fastened to the DVD-R/RW unit,
install the DVD-R/RW unit together
with its mounting fixture to the
DVD recorder PRV-LX1.
÷
Align the two square holes on the
drive 2 mounting fixture
with the
tabs on the PRV-LX1, then use the
4 screws removed in step 4 to
fasten the drive in place (fasten
screws in order
1
=
2
=
3
=
4
).
Square holes
Tabs
9. Attach the IDE cable and power
cable
÷
Remove the IDE cable and power
cable from the cable binder.
NOTE:
Beware of all surrounding sharp edges when
connecting and arranging cables.
IDE cable
connector
Power cable
connector
Binder strap
÷
Align the connectors correctly and
connect securely.
IDE cable
Power cable
