Pioneer PDR-F10, Operating Instructions Manual

Page: 30 / 162

6 More Recording Features
30
En
2 Press CD-R MENU.
3 Use
4
or
¢
to select DISC
NAME or TRACK NAME.
If you want to enter an artist's name, choose
DISC NAME
.
4 Press SET.
If you want to enter an artist's name, press
SET
again.
The display shows a blinking cursor at the
first character position.
• If a disc/artist/track name has already
been entered, the display shows the
existing name.
5 Select/change the character at
the current cursor position.
Use
4
and
¢
to change the character.
Press
SYSTEM DISP
to switch between
character sets:
• Upper case:
ABCDEFGHIJKLMNOPQRSTUVWXYZ
<space>
• Lower case:
abcdefghijklmnopqrstuvwxyz
<space>
• Numbers and symbols:
1234567890 ! " # $ % & ’ ( ) * + , - . /
< = > ? @ [ ] ˆ _ ' { | } <space>
Using CD text
You can name a CD-R or CD-RW so that when
you load the disc into the player, the disc
name, track name, or artist name appears in
the display. Each name can be up to 120
characters long, including spaces. You can
store all the text (up to 2000 characters) for
up to three non-finalized discs in the recorder
at one time. This is useful when you want to
edit the text during another recording session
with the same disc.
Be careful: When you set text for a fourth
disc, the oldest text information (for the first
disc) is deleted from memory.
Once you finalize a CD-R, the text informa-
tion cannot be changed. Text with CD-RW
discs is deleted when you erase the corre-
sponding track.
SYSTEM
DISP
CHARACTER
CD-R
SET MENU
CANCEL
1 ¡
4 ¢
1 Load the disc you want to enter
text for.
If you want to enter a disc name or artist
name, the disc must be stopped with the total
number of tracks and playing time displayed
(press
7
to make sure).
If you want to enter a track name, the track
has to be playing, paused, or selected (from
stop, use the
4
and
¢
buttons to select
a track).