2
1
2
3
4
1
2
3
4
C
D
F
A
B
E
PDP-S38
FOR PRECAUTION OF REASSEMBLY AND DISASSEMBLY
The grille is attached to the baffle using double-sided self-adhe-
sive tape. To avoid damaging the cabinet, work with the
speaker on top of a blanket or similar, face the grille upward.
There is slot in the lower part of the speaker. Insert a screw-
driver(-) into slot and push up detach the lower part.
Taking care not to damage the grille and baffle, lift the grille a
little bit at a time with hand.
When reattaching the grille, use double-sided self-adhesive
tape in the locations shown in the diagram and press the grille
assy into place.
The grille is fixed using boss and double-sided self-adhesive
tape(The tape is in the locations indicated in the diagram be-
low). Do not use a dryer to heat the self-adhesive tape when
removing the grille.
The woofer is attached to the baffle by 4 internal screws. To
detach it, first remove the baffle from cabinet. Then unfasten
those screws. When attaching the woofer, face its plus terminal
downward.
When changing it, stick the felt(SED1123 4pcs.) on the speci-
fied position of the woofer frame.
The tweeter is attached to the baffle by
2 internal screws. To
detach it, first remove the baffle from cabinet. Then unfasten
those screws. When attaching it, face its plus terminal (bigger
terminal) rightward.
LOCATIONS TO FIX DOUBLE-SIDED
SELF-ADHESIVE TAPE
(32)
Tape
(SEH1077 x2)
Grille ASSY
(Back Side)
GRILLE
Slot
Screwdriver(-)
Grille
Baffle
LOCATIONS TO FIX FELT
FELT
(SED1123)
FELT
(SED1123)
