Pioneer PDP-S33-LR XIN/UC, Operating Instructions Manual

Page: 3 / 19

3
English
English
INSTALLATION ON THE PLASMA
DISPLAY
Flush mount
Perform installation according to the following steps
1
to
2
.
1
Attach the mounting fittings to the
speakers.
The illustration below shows the right speaker. Attach the left
side mounting fitting in the same way.
1
Attach a bracket for flush mounting (RIGHT) to the top of
the right speaker, as shown.
2
Attach another bracket for flush mounting (RIGHT) to the
bottom of the speaker in the same way.
2
Attach the speakers to the display.
The illustration below shows how to attach of the right speaker.
Attach the left speaker in the same way.
1
Fix the upper screw temporarily in
advance to hang the speaker on the
display (In this case, leave a space
of about 5 mm between the head
of the screw and the display).
2
Hang the speaker on the upper screw.
3
Fix the lower screw temporarily.
4
Adjust the position of the speaker and then fix the upper
and lower screws firmly.
5 mm
The display
2 1
2
4
3
Padding
strip
Set back mount
Perform installation according to the following steps
1
to
2
.
1
Attach the mounting fittings to the
speakers.
The illustration below shows the right speaker. Attach the left
side mounting fitting in the same way.
1
Attach a bracket for set back mounting (RIGHT) to the
top of the right speaker, as shown.
2
Attach another bracket for set back mounting (RIGHT) to
the bottom of the speaker in the same way.
2
Attach the speakers to the display.
The illustration below shows how to attach
of the right speaker. Attach the left speaker
in the same way.
1
Fix the upper screw temporarily in
advance to hang the speaker on the
display (In this case, leave a space
of about 5 mm between the head of
the screw and the display).
2
Hang the speaker on the upper screw.
3
Fix the lower screw temporarily.
4
Adjust the position of the speaker and then fix the upper
and lower screws firmly.
2 1
Padding
strip
5 mm
The display
2
4
3
SRD1281A_En_01_07 05.2.28, 2:49 PM 3