Pioneer PDP-R05E, Service Manual

Page: 139 / 213

PDP-R05E
139
5 6 7 8
5 6
7
8
C
D
F
A
B
E
6.7 SERVICE FACTORY MODE
To operate in Service Factory mode, use the supplied remote control unit.
Remote control codes in Service Factory mode
SR Function Main Function Remarks
Muting Switching the main items Shifting to the next main item
DOWN Switching the subtitled items Shifting downward to the next subtitled item
UP Switching the subtitled items Shifting upward to the next upper layer
LEFT
Increasing the adjustment
value
Increasing the adjustment value
RIGHT
Decreasing the adjustment
value
Decreasing the adjustment value
SET Switching layers
Shifting downward or upward to the next lower or upper
layer
INPUT Selecting input Shifting the input to the next function
INPUTxx Selecting input Switching the input to xx
CH+ Increasing the channel number
Advancing a preset channel
(effective when Function is set to TV)
CH-
Decreasing the channel
number Turning a preset channel backward
(effective when Function is set to TV)
Numeric keys Function: TV
Function: TV
(previously selected channel number is selected)
POWER Power OFF Turning the power off
FACTORY Factory OFF Turning Service Factory mode off
MENU Menu ON Turning Service Factory mode off and Menu mode on
Operation in Service Factory mode
How to enter Service Factory Mode
¶
Functions whose settings are set to OFF
The settings for the following functions are set to OFF when Service Factory mode is entered (including when the "FAY"
command is received):
• Two-screen operations (input function set on the main side is selected)
• P ZOOM
• STILL
• Detection of the TRAP switch (The log in the EEPROM is retained.)
¶
User data
User data will be treated as follows:
• User data on picture- and audio-quality adjustments are not reflected (data stored in memory will be retained).
• Data on screen position are reset to the default values (data stored in memory will be retained).
Prease refer to the technical documentation (Service Know-How). same as