Pioneer PDP-R03E, Service Manual

Page: 101 / 112

101
PDP-R03E
(5) Component 15 kHz signal adjustment
(6) Component HDTV signal adjustment
2. Factory settings
(1) Data Copy
(2) Delivery setup
1 Setup 1. Select component 15 kHz.
2. Select component source.
Color bar signal including 100% white, like split
field color bar
Adjustment item Description Adjustment procedure
2 MAIN component
15 K Y level
adjustment Adjust TB1274_MAIN output (TP803) to 0.7 Vp-p.
Adjusted value: 0.7 ±0.05 V
3 MAIN component
15 K color density
adjustment Adjust TB1274_MAIN output
(TP802) to 0.35 Vp-p.
Adjusted value:
0.35 ±0.025 V
4 MAIN component
15 K Cr level
adjustment Adjust TB1274_MAIN output
(TP801) to 0.35 Vp-p.
Adjusted value:
0.35 ±0.025 V
0.35V
0.35V
1 Setup 1. Input HDTV (1080i) component signal.
2. Select component source.
Color bar signal including 100% white, like split
field color bar
Adjustment item Description Adjustment procedure
2 MAIN component
HDTV contrast
adjustment Turn off the PEAK ACL control.
Adjust the output (TP815) of IC810 (11) to have
1.1 Vp-p from the pedestal level.
Adjusted value: 1.1 ±0.05 V
1 Data Copy 1. Using the adjustment key, set “ON” in the DATA
COPY line. Wait until “OFF” is displayed instead.
Finally turn off the power to quit the process
adjustment mode.
Adjustment item Description Adjustment procedure
1 Delivery setup Press the Delivery Setup button located on the remote
controller, or position the cursor on the INDUSTRY
INIT line, set the line to ON with the ADJ key, and then
press the ENTER key. The adjustment is finished
when the line turns OFF,
Adjustment item Description Adjustment procedure
* Finally turn off the power to exit from the process adjustment mode.