Setting up
08
27
En
Eng
lis
h
11 Select “Color System“ (
/
).
12 Select a color system (
/
).
You can select from “Auto”, “PAL”, “NTSC”, “SECAM”, “PAL-M”,
“PAL-N”, and “4.43NTSC”.
• With “Air (US Type)” or “Cable (US Type)” selected, you cannot
change the factory default (“Auto”).
13 Select “Store“ (
/
).
14 Select “Yes“ (
/
).
• With “Air (US Type)” or “Cable (US Type)” selected, press
/
to select “ADD/DEL”, then press
/
to select “ADD”.
• With “Yes” selected, you can select the channel using
P+/P–
.
With “No” selected, you cannot select the channel using
P+/P–
.
15 Press HOME MENU to exit the menu.
• Alternatively, to set up for another channel, repeat steps 5 to 14.
Note
• Manual Adjust also allows you to make selections for “Tuner
NR”, “Child Lock”, and “High Deviation”. See
Reducing video
noise
,
Setting Child Lock
, and
Suppressing audio distortion
respectively.
• This plasma television is equipped with the auto frequency
tuning function that automatically adjusts tuning frequencies
according to received signals. For this reason, the Manual
Adjust menu may show slightly different frequencies from your
entry when you access the menu next time. You cannot
deactivate the Auto Frequency Tuning function.
Reducing video noise
For the individual channels, you can specify whether the plasma
television should reduce video noise depending on the levels of
broadcasting signals.
1
Press HOME MENU.
2
Select “Setup” (
/
then ENTER).
3
Select “Analog TV Setup” (
/
then ENTER).
The password entry screen appears. Enter your four-digit password
using buttons
0
to
9
. For the password, see
Using a password
on
page 41.
4
Select “Manual Adjust” (
/
then ENTER).
5
Select “Program Entry” (
/
).
6
Select a program number (
/
).
• With “General” selected, you can select 1 through 99.
• With “Air (US Type)” selected, you can select 2 through 69.
• With “Cable (US Type)” selected, you can select 1 through 125.
7
Select “Tuner NR“ (
/
).
8
Select “On“ (
/
).
9
Press HOME MENU to exit the menu.
Note
• This function may not achieve a satisfactory result, depending
on the conditions of broadcasting signals.
• The factory default is “On”.
Setting Child Lock
Child Lock inhibits selected TV channels from being tuned and
watched.
1
Repeat steps 1 to 6 provided for
Reducing video noise
.
After selecting a program number (using Program Entry), perform
the following steps:
2
Select “Child Lock“ (
/
).
3
Select “Block“ (
/
).
• The selection is switched between “View” (factory default) and
“Block”.
4
Press HOME MENU to exit the menu.
Suppressing audio distortion
You can suppress audio distortion that may be induced when too
strong audio signals are received in the selected channel.
Note
• High Deviation is selectable only when you have selected “D/K”
for “System” under
Setting up TV channels manually
on
page 26.
1
Repeat steps 1 to 6 provided for
Reducing video noise
.
After selecting a program number, perform the following steps:
2
Select “High Deviation“ (
/
).
3
Select “High”, “Mid” or “Low” (
/
).
With “Air (US Type)” or “Cable (US Type)” selected, you cannot
change the factory default (“Off”).
4
Press HOME MENU to exit the menu.
Note
• While watching a TV channel with any High Deviation setting,
you cannot change the sound multiplex mode.
Item
Description
Off
Deactivates the function
High
Suppresses audio distortion slightly; however, the
audio volume is slightly lowered than when Off is
selected
Mid
Suppresses audio distortion moderately
Low
Suppresses audio distortion further; however, the
audio volume is further lowered
