Pioneer PDP-505HD Service Manual Download Page 96

Page: 96 / 99

PDP-505HD

8. PANEL FACILITIES AND SPECIFICATIONS

PANEL FACILITIES

Main unit

Main power switch

Use to switch the main power of the unit on and off.

STANDBY/ON indicator

This indicator is red during standby mode, and turns to
green when the unit is in the operation mode.

Remote control sensor

Point the remote control toward the remote sensor to
operate the unit.

Operation panel on the main unit

STANDBY/ON button

Press to put the display in operation or standby mode.

INPUT button

Press to select input.

Main Unit

MENU button

Press to open and close the on-screen menu.

ADJUST (

∞

) buttons

Use to navigate menu screens and to adjust various
settings on the unit.
Usage of cursor buttons within operations is clearly
indicated in the on-screen display.

SET button

Press to adjust or enter various settings on the unit.

S.MODE button

Press to manually select the screen size.

RETURN button

Press to reset the unit to factory set defaults.

8
9
0

STANDBY/ON

INPUT

MENU

ADJUST

SET

S.MODE

RETURN

Note

When optional speakers have been connected, the

operation panel on the main unit will not be operable.

Main unit

Operation panel on the main unit

Summary of Contents for PDP-505HD




































































































Search results

Summary of Contents for PDP-505HD

Reviews:

Related manuals for PDP-505HD

Brands by name

Popular brands

Pioneer PDP-505HD, Service Manual

Search results

Summary of Contents for PDP-505HD

Reviews:

Related manuals for PDP-505HD

Brands by name

Popular brands