59
En
Useful Adjustment Settings
12
En
gl
is
h
Resetting the password function
1
Press
HOME MENU
.
2
Select “Setup” ( / then
ENTER
).
3
Select “Password” ( / then
ENTER
).
• The password entry screen appears. Enter your 4-digit
password using buttons
0 – 9
.
4
Select “Reset” ( / then
ENTER
).
5
Select “Yes” ( / then
ENTER
).
6
Press
HOME MENU
to exit the menu.
NOTE
• The above procedure will reset the password to the factory
default (1234).
Disabling the password function
Use the following procedure if you want to deactivate the
protection function that prompts password entry.
1
Press
HOME MENU
.
2
Select “Setup” ( / then
ENTER
).
3
Select “Password” ( / then
ENTER
).
• The password entry screen appears. Enter your 4-digit
password using buttons
0 – 9
.
4
Select “Password Setting” ( / then
ENTER
).
5
Select “Disable” ( / then
ENTER
).
6
Press
HOME MENU
to exit the menu.
NOTE
• The above procedure will reset the password to the factory
default (1234).
• After disabling the password function, you cannot change
the Child Lock settings. For the Child Lock, see page 43.
• After disabling the password function, you cannot change or
reset the password.
• When you enable the password function again after
disabling it, the factory default password (1234) is restored.
We suggest you write down your password so you don’t forget it.
PDP-506XDE/PDP-436XDE
Your password No.:
If you forget the password
When the message “Please Input Your Password” is
displayed in step 3 under “Changing the password” (page
58), “Resetting the password function” (page 59), or
“Disabling the password function” (page 59), press the
ENTER
button on the remote control unit and hold it
down for 3 seconds or longer.
The password reverts to “1234”.
PDP506XDE.book Page 59 Friday, June 17, 2005 3:08 PM
