![background image](http://html.mh-extra.com/html/pioneer/pdk-50hw2/pdk-50hw2_service-manual_331937079.webp)
79
PDK-50HW2
7.1.3 Block diagram of ASSY for each SENSOR-H to SENSOR-N
SENSOR AMP
(x 8)
to LED-A PCB Assy
H_RCV (H)
H_RCV ( I)
H_RCV (J)
H_RCV (K)
V_RCV (L)
V_RCV (M)
V_RCV (N)
SENSOR AMP
(x 8)
SENSOR AMP
(x 8)
SENSOR AMP
(x 8)
SENSOR AMP
(x 8)
SENSOR AMP
(x 8)
SENSOR AMP
(x 8)
SENSOR AMP
(x 8)
3 to 8
SEN_SEL
SEN_ADR
ENABLE
SDEC_SEL
S
E
L
E
C
T
S
E
L
E
C
T
S
E
L
E
C
T
S
E
L
E
C
T
S
E
L
E
C
T
S
E
L
E
C
T
S
E
L
E
C
T
S
E
L
E
C
T
•If the unit length of the board is a problem
For a horizontally formatted board, the HSDEC_SEL or H_RCV signal may have been interrupted.
For a vertically formatted board, the VSDEC_SEL or V_RCV signal may have been interrupted.
•When there is a problem within the 8 sensor unit
For a horizontally formatted board, the HSEN_ADR signal may have been interrupted.
For a vertically formatted board, the VSEN_ADR signal may have been interrupted.
•When there is a problem with the 8 LED sensor cycle
For a horizontally formatted board, the HSEN_SEL signal may have been interrupted.
For a vertically formatted board, the VSEN_SEL signal may have been interrupted.
The illustration shows the block diagram of the sensor board (applicable to SEN-H to SEN-N).
For both horizontally and vertically formatted boards, the block structure is the same. If any of the three problems listed below are
encountered, use the checkpoints listed below.
Summary of Contents for PDK-50HW2
